Panasonic SHAN-TM700 System Camera and Switcher Product Lineup Catalog - Page 5

Specifications Power requirements Current consumption DC 12 V (AC adaptor supplied) DC 42 - 57 V (PoE+ power supply) 1.8 A (AC adaptor supplied) 0.6 A (PoE+ power supply) Gain selection Frame mix*2 Auto, 0 dB to 36 dB 0 dB, 6 dB, 12 dB, 18 dB, 24 dB As of April, 2018 Ambient operating temperature 0 °C to 40 °C (32 °F to 104 °F) Storage temperature -20 °C to 50 °C (-4 °F to 122 °F) 59.94p/59.94i: 1/100, 1/120, 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/10000 GENERAL Allowable humidity ranges Mass 20 % to 90 % (no condensation) Approx. 3.1 kg (6.83 lb) [Including mount bracket] 29.97p: 1/30, 1/60, 1/120, 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/10000 Dimensions (W x H x D) 180 mm × 228 mm × 234 mm (7-3/32 inches x 9 inches x 9-3/16 inches) (excluding protrusions, cable cover, direct ceiling mount bracket) Electronic shutter speed 23.98p: 1/24, 1/60, 1/120, 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/10000 Finish Controller supported*1 AW-HE130WP/AW-HE130WE: Pearl white AW-HE130KP/AW-HE130KE: Metallic black AW-RP120G, AW-RP50, AK-HRP200G, AK-HRP1000GJ, AK-HRP1005GJ INPUT OUTPUT INPUT/ OUTPUT Input connector DC 12 V IN, G/L IN (BNC) • BBS (Black Burst Sync), tri-level sync supported • Locking to a color subcarrier is not possible with BBS. PoE+ (IEEE802.3at standard) Video output HDMI HDMI connector • HDCP is not supported. • Viera Link is not supported. 3G/HD/SD-SDI OUT SMPTE424/SMPTE292/SMPTE259 standards 75 Ω (BNC×1) VIDEO OUT NTSC/PAL 1.0 V [p-p]/75 Ω (BNC×1) LAN LAN connector for IP control (RJ-45) RS-422 CONTROL IN RS-422A (RJ-45) Synchro scan Gamma White balance Chroma amount variability FUNCTIONS Scene file AND PERFORMANCE Output format φ3.5 mm stereo mini jack Input impedance: High impedance Input/ Output connector MIC/LINE input • During MIC input Supported mic: Stereo mic (plug-in power ,on/off switching via menu) • Supply voltage: 2.5 V ± 0.5 V Mic input sensitivity: Approx. -40 dBV ± 3 dBV (0 dB=1 V/Pa, 1 kHz) • During LINE input Synchronization system [Pan-tilt head unit] Installation method Input level: Approx. -10 dBV ±3 dBV [Camera unit] Imaging sensors 1/2.86-type Full-HD 3MOS Lens FUNCTIONS AND PERFORMANCE Focus Focus distance Motorized 20 zoom, F1.6 to F3.4 (f=4.5 mm to 90 mm; 35 mm equivalent: 32.13 mm to 642.5 mm) Switching between auto and manual Entire zooming range: 800 mm (2.62 ft) Wide end: 400 mm (1.31 ft) Color separation optical system 3MOS Minimum illumination 2 lx (50 %, F1.6, 36 dB) Horizontal resolution 1000 TV lines Typ (Center area) Camera/pan-tilt head control Pan-tilt operation speed Panning range Tilting range*10 Quietness 50p/50i: 1/60, 1/120, 1/250, 1/500,1/1000, 1/2000, 1/4000, 1/10000 1/25, 1/60, 1/120, 1/250, 1/500, 25p: 1/1000, 1/2000,1/4000,1/10000 59.94 Hz:60.15 Hz to 642.21 Hz 50 Hz:50.15 Hz to 535.71 Hz HD, SD, FILMLIKE1, FILMLIKE2, FILMLIKE3 0.30 to 0.75 (Manual setting) AWB A, AWB B, ATW, 3200K, 5600K, VAR (2000K to 15000K) OFF, -99 % to 40 % Scene1, Scene2, Scene3, Scene4 1080/59.94p, 1080/29.97p*3, 1080/23.98p*4*5, 1080/59.94i, 1080/29.97PsF*5, 1080/23.98PsF*5, 1080/50p, 1080/25p*3, 1080/50i, 1080/25PsF*6, 720/59.94p, 720/50p, 576/50p (i)*7, 480/59.94p (i)*7, Internal/External synchronization (BBS/Tri-level sync) Stand-alone (Desktop) or suspended (Hanging)*8 IP connecting cable • When connecting through a hub: LAN cable*9 (category 5e or above, straight cable), max. 100 m (328 ft) • When a hub is not used LAN cable*9 (category 5 or above, crossover cable) max.100 m (328 ft) RP connecting Cable LAN cable*9 (category 5 or above, straight cable), max. 1000 m (3280 ft) RS-422A, AW series protocol 0.08°/s to 60°/s ±175° -30° to 210° NC35 or less *1: It may be necessary to upgrade the version of the controller in order to support the unit. For details on upgrading, visit the support page on the following website. https://pro-av.panasonic.net / *2: This cannot be configured when the format is 1080/29.97p, 1080/23.98p, 1080/29.97PsF 1080/23.98PsF, 1080/25p, or 1080/25PsF. *3: Native output. *4: OVER 59.94i. *5: Your monitor may recognize the signal as 59.94i. *6: Your monitor may recognize the signal as 50i. *7: A 'P' signal is output as HDMI output, an 'I' signal is output as SDI and an analog output for output formats of 480/59.94p(i) and 576/50p(i). *8: To ensure safety, the unit must be secured using the mount bracket supplied. *9: Use of an STP (shielded twisted pair) cable is recommended. *10: Depending on the pan or tilt position, the camera may be reflected in the image. Computer requirements CPU Intel® Core™ 2 DUO 2.4 GHz or more As of April, 2018 Memory Network function Image display For Windows: 1 GB or more (2 GB or more for 64-bit editions of Microsoft® Windows® 8.1, Microsoft® Windows® 8, andMicrosoft® Windows® 7) For Mac: 2 GB or more 10BASE-T or 100BASE-TX port × 1 Resolution: 1024 × 768 pixels or more Color generation: True Color 24-bit or more For Windows: Supported operating systems and web browsers Microsoft® Windows® 8.1 Pro 64-bit / 32-bit *1 Windows® Internet Explorer® 11.0*1 *3 Microsoft® Windows® 8 Pro 64-bit / 32-bit *1 Windows® Internet Explorer® 10.0*1 *3 Microsoft® Windows® 7 Professional SP1 64-bit / 32-bit *2 Windows® Internet Explorer® 11.0 / 10.0 / 9.0 / 8.0 *3 For Mac: OS X 10.9 Safari 7.0.2 OS X 10.8 Safari 6.1.2 OS X 10.7 Safari 6.1.2 For iPhone, iPad, iOS 7.1 Standard web browsers iPod touch: For Android Android OS Standard web browsers Other CD-ROM drive (for using the Operating Instructions and various software) Adobe® Reader® (for viewing the Operating Instructions on the CD-ROM) * 1 Use the desktop version of Internet Explorer. (Internet Explorer for Windows UI is not supported.) * 2 Windows® XP compatibility mode is not supported. * 3 The 64-bit version of Internet Explorer® is not supported. * For the latest information on supported OS/browser, please refer to the "service and support" on the Panasonic website (https://pro-av.panasonic.net).