Panasonic SL-1200GR2 Owners Manual Multi-lingual - Page 15

Before fitting the turntable 1 Remove the magnet cover from the turntable.  There is a magnet and its cover on the back side of the turntable. Remove the magnet cover before fitting to the main unit. Back side of the turntable Magnet cover Magnet Fixing screw Attention  Keep any magnetic-sensitive object such as a magnetic card and watch away from the magnet.  Prevent the turntable from hitting the main unit or falling off. Prevent dust or iron powder from adhering to the magnet on the back side.  Do not touch the fixing screws (three locations) of the turntable. The rating performance cannot be guaranteed if they are out of position. Fitting the turntable 2 Slowly set the turntable on the center spindle. To remove the turntable  As shown in the figure on the right, set your fingers in the two holes on the turntable, hold the center spindle down and remove the turntable upward. Attention  Be careful when handling the turntable, as it is heavy.  Keep your fingers from being caught.  Wipe off fingerprints or dirt with a soft cloth.  Fitting the turntable mat 3 Lay the turntable mat on the turntable. Attaching the head shell 4 Fit the head shell with the cartridge into the tone arm. Keep the head shell horizontal and tighten the locking nut.  Be careful not to touch the stylus tip. Locking nut Head shell Attaching the balance weight 5 Attach the balance weight to the rear of the tone arm. Balance weight Auxiliary weight  Attach the included auxiliary weight to the rear of the tone arm according to the weight of your cartridge. For adjustable cartridge weight ranges, see "Applicable cartridge weight range". (27) Note  The inside of the balance weight is greased. 15 (15) English Getting started