Panasonic SL-1200MK2PK Operating Instructions - Page 8

Playing records Preparation 1. Put a record on the turntable. 2. Take off the stylus cover and release the arm clamp. 1 3 2 4,5 To temporarily stop play Lift the cue lever. The stylus lifts off the record. Refer to page 9 for fine adjustments to the pitch When using EP records EP record adaptor 1. Take the EP record adaptor out of its holder and fit it over the center spindle. 2. Press [45] to change the speed. When play finishes 1. Lift the cue lever and move the tone arm back to the arm rest. 2. Press [start-stop]. The electronic brake gently stops the turntable. 3. Turn [power] to turn the unit off. 4. Clamp the tone arm and put the stylus cover back on. When the player is to be used for scratch play. Use the disc slip sheet instead of the turntable mat. This enables the record to be easily moved during play. •Top (printed side): Lay the record on this side. •Bottom: Slippery side. For a different kind of slip Put the transparent sheet under the disc slip sheet. Disc slip sheet Transparent sheet 1 Turn [power] to turn the unit on. •The pilot lamp comes on. •33 1/3 r/min is automatically selected and the indicator lights. •Press [45] if you are playing a 45 r/min record. off on Pilot lamp power Indicator lights 33 45 2 Press [start-stop]. The turntable starts revolving. start • stop 33 3 Press [reset] to light the pitch control green LED lamp. The pitch returns to 33 1/3 or 45 r/min. Green LED indicator reset Use the above indicated pitch for playing standard music. 4 Lift the cue lever and move the tone arm over the record. Cue lever 5 Lower the cue lever. The tone arm moves down and play starts. To light up the stylus •Press the stylus light switch. The stylus light rises up and illumi- nates the stylus. •When the light is not required, press it down. The light also goes out. Press the switch firmly. If the switch is lightly pressed, the light may come on but not rise up. Stylus light Stylus light switch 8 RQT7018