Panasonic SV-P10U Printer - Page 7

1 2 12 3 13 4 14 11 10 9 8 5 6 7 18 17 16 15 Preparation Controls and Components 1 Power Lamp [ ] When you turn the power on, the Power Lamp turns on. 2 Power Button [ ] Hold down to turn on/off the SD Mobile Printer for about 2 seconds. 3 4-picture mode Lamp [ ] Lights up when in the 4-picture mode. 4 4-picture mode Button [ ] Press this to print the four same pictures on one sheet. Clear Button [ ] Restarts to print the total number of sheets (the specified number of sheets, if DPOF is implemented) from the initial page. 5 Ink Cassette Insert Location Insert the Ink Cassette. 6 Ink Cassette Eject Lever [ ] Slide to eject Ink Cassette. 7 Ink Cassette Compartment Door 8 Memory Card Door 9 Memory Card Slot This is where the memory card is inserted. 10 Paper Insert Slot [PAPER IN 1] Insert a sheet of paper here. 11 Paper Exit Slot A printed paper exits here. 12 Print Lamp [PRINT] When this Lamp lights up, the printer is ready to print. 13 Error Lamp [ERROR] This lights when normal printing is no longer possible because, for example, the printing paper or ink has run out. 14 Access Lamp [ACCESS] While the SD Mobile Printer is making an access to the Card, this Lamp lights up. 15 Battery Holder Attach the battery here. 16 DC Input Socket [DC IN 4.9V] Connect the AC Adapter (supplied accessory) to supply the power. 17 USB Socket [USB] Connect the accessory USB cable here for connection to your personal computer. 18 Paper Sliding Slot This slot is the opening for sliding the paper in and out while printing. Do not touch the paper while printing. 7