Panasonic TC-32C400 Owners Manual - Page 8
Assemble the pedestal, Attach the TV to the pedestal
View all Panasonic TC-32C400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Setting Up the TV 1 Assemble the pedestal 2 Attach the TV to the pedestal 2 1 Removing the pedestal from the TV Be sure to remove the pedestal in the following way when using the wall-hanging bracket or repacking the TV. 1 Lay the TV on a foam mat or thick soft cloth on a table. 2 Remove the assembly screws from the TV. 3 Pull out the pedestal from the TV. 4 Remove the assembly screws from the bracket. Wall mounting the TV (optional) Please contact a professional installer to purchase the recommended UL qualified wall-hanging bracket. For additional details, please refer to the wall-hanging bracket installation manual. Rear of the TV (View from the side) a b Depth of screw Screw for fixing the TV onto the wallhanging bracket (not supplied) ■ Holes for wall-hanging bracket installation a: 7.9" (200 mm) b: 7.9" (200 mm) ■ Screw specification Type: M4 Depth of screw: Minimum: 0.36" (9 mm) Maximum: 0.55" (14 mm) Warning ●Always be sure to ask a qualified technician to carry out set-up. ●Do not mount the unit directly below ceiling lights (such as spotlights, floodlights or halogen lights) that typically give off high heat. Doing so may warp or damage plastic cabinet parts. ●Take care when fixing wall brackets to the wall. Always ensure that there are no electrical cables or pipes in the wall before hanging bracket. ●To prevent fall and injury, remove the TV from its fixed wall position when it is no longer in use. ●Incorrect wall-hanging bracket or incorrect fitting may cause equipment to fall, resulting in injury and product damage. ●Panasonic disclaims liability for any damage or injury arising from incorrect wall-hanging bracket, incorrect fitting or otherwise failure to follow the above instructions. 8 English