Panasonic TGA650 Installation Manual - Page 3

Selecting the display language You can select either "English" or "Spanish" as the display language. The factory preset is "English". Press [MENU] * [V] or [A] to select "Initial setting" Soft key SELECT ) • * [V] or [A] to select "Change language" Soft key SELECT ) * Soft key ( ESPANOL to select "Espanol", or soft key ( ENGLISH ) to select "English" * Soft key GUARDAR ) for Spanish, or soft key ( SAVE ) for English * [OFF] Optional Headset Connecting an optional headset to the handset allows a hands-free phone conversation. Please use only a Panasonic KX-TCA60, KX-TCA86, KX-TCA88, KX-TCA88HA, KX-TCA91, KX-TCA92 or KX-TCA98 headset. To order, call the accessories telephone number on page 1. Connecting an optional headset Open the headset jack cover, and insert the headset plug into the headset jack as shown below. Headset Jack • Headset sold separately. Model shown here is KX-TCA88. Wall Mounting The charger can be wall mounted. Connect the AC adaptor. Install screws using the wall template (see below). Mount the charger (0). Slide it down (0), then slide down to the right (0) until it is secured. 2.45 cm ( 31/ 32") Screws To Power Outlet 0 0 FCC and Other Information WHEN PROGRAMMING EMERGENCY NUMBERS AND(OR) MAKING TEST CALLS TO EMERGENCY NUMBERS: 1. Remain on the line and briefly explain to the dispatcher the reason for the call. 2. Perform such activities in the off-peak hours, such as early morning or late evenings. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Privacy of communications may not be ensured when using this phone. CAUTION: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this device. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. Operating near 5.8 GHz electrical appliances may cause interference. Move away from the electrical appliances. FCC RF Exposure Warning: To comply with FCC RF exposure requirements, the handset unit may be carried and operated with only the specific provided belt-clip. Other non-tested belt-clips or similar body-worn accessories may not comply and must be avoided. This equipment is hearing aid compatible as defined by the FCC in 47 CFR Section 68.316. When you hold the phone to your ear, noise might be heard in your Hearing Aid. Some Hearing Aids are not adequately shielded from external RF (radio frequency) energy. If noise occurs, use an optional headset accessory or the speakerphone option (if applicable) when using this phone. Consult your audiologist or Hearing Aid manufacturer about the availability of Hearing Aids which provide adequate shielding to RF energy commonly emitted by digital devices. r(.45 cm 31/32..) Wall Template - 4- For assistance please call: 1-800-211-PANA(7262) -5-