Panasonic TH-42PX60U 50" Plasma Tv - Page 8
Setting-up, Stopping the plasma television from falling over, Accessories for pedestal security - plasma tv
UPC - 037988241057
View all Panasonic TH-42PX60U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Accessories/Options 2 Setting-up Television unit * Carry out work on a horizontal and level surface. Label B B Rear Pedestal Lift the television unit above the pedestal base, with the back of the display unit on the same side as the Label. Then align the holes in the television unit with the poles of the pedestal and lower the television unit into place. Use the assembly screws B (M5 x 30) to fasten securely. 3 Stopping the plasma television from falling over * The plasma TV must be fastened to both the base and the wall. For 37'', 42'', 50'' Plasma television Accessories for pedestal security 1 Band (2) 2 Screw (2) 3 Wood screw (2) Nominal diameter 4 mm x 12 ■Securing to a base ■Securing to a wall Front 4 Clamp (2) * Remove the screws at both top corners on the rear side of the plasma TV, and attach the clamps 4 to the plasma TV using the removed screws. Front D Wood Worktop Fasten with wood screws in the holes in the back edge of the wood worktop. If there are no holes, first drill them in the middle of the thickness of the wood worktop, and then fasten the strap with wood screws. Screws on main body Securing method * Use strong wire or chain which is commercially available to secure the plasma television to a solid area of the wall or a pillar. 8