Panasonic TH-43LFE8U Professional Display for Simple Entry-Level Digital Signage - Page 22
USB terminal connection
View all Panasonic TH-43LFE8U Professional Display for Simple Entry-Level Digital Signage manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
USB terminal connection Connect the USB memory to use the USB media player function. (see page 31) Also, power is supplied when a separately sold stick PC, etc. are connected. Note Ɣ A stick PC and connection cables are not supplied with this unit. Pin assignments and signal names for USB Terminal 1234 Pin No. Signal name +5 V DC DATA DATA + GND (Ground) Power of up to 5V/1A can be supplied to an external device when receiving images. Ɣ If the electric current exceeding the power supplying capability is applied, the output is blocked, and the following message is displayed. In this case, remove the equipment and then turn the power off/on using the remote control, etc. Note Ɣ If the direct connection to this unit is not possible due to the size of a stick PC, etc. use a commercially sold extension cable. Ɣ Depending on the type of a USB memory device, it may come in contact with the periphery such as a back cover, and cannot be attached. Use a commercially sold extension cable, or use a small type of a USB memory device connectable to this unit. Stick PC USB cable (commercially available) HDMI extension cable (commercially available) 22 English