Panasonic TH-43LFE8U Professional Display for Simple Entry-Level Digital Signage - Page 63

Page 63 highlights

Power on screen delay You can set the power-on delay time of the displays to reduce the power load, when you press to turn on the multiple displays that are set together. Set each display's setting individually. [Off]: The display will be turned on at the same time as is pressed. [AUTO]: Sets the delay time automatically according to the number set for [Display ID]. The delay time is determined by multiplying [Display ID] x 0.3.seconds. HJ:KHQ>'LVSOD\,'@LVĺVHFRQGV [1 to 30]: Set the power-on delay time (second). After pressing , the display will be powered on with time delay depending on this setting. Note Ɣ During this function is working, the power indicator is blinking green. Ɣ This function also works when the power recovers from failure or after plugging off and in again the power cord. Clock display Sets to display / hide the clock. [Off]: Hides the clock. [On]: Displays the clock. Note Ɣ The clock is displayed at the lower left of the screen when button is pressed. Ɣ When [Date and time] is not set, the clock is not displayed even when [Clock display] is [On]. (see page 54) Power on message(No activity power off) Sets to show/hide [No activity power off] precautions at the time the unit is turned on. [On]: The warning precautions are shown at the time of power ON. [Off]: The warning precautions are not shown at the time of power ON. Note Ɣ This setting is enabled only when [No activity power off] is [Enable] (see page 52). Power on message(Power management) Whether to show/hide an information message that tells the power has been turned off by Power Management when the power is set to [On]. [On]: The information is shown at the time of power [On]. [Off]: The information is not shown at the time of power [On]. Note Ɣ This setting is enabled only when "Power management" function is [On] (see page 51). POWER button lock Sets the lock setting for the display Main Power On / Off switch. [On]: Main Power On / Off switch operation is disabled. [Off]: Main Power On / Off switch operation is enabled. Note Ɣ This function is only for TH-43LFE8U, TH-48LFE8U, TH-55LFE8U and TH-65LFE8U. Initialization When both main unit buttons and remote control buttons are disabled due to the [Button lock], [Controller user level] and [Controller ID function] settings, set all the values [Off] so that all the buttons are enabled again. Press together with and hold for more than 5 seconds. [Shipping] is displayed and the lock is released when it disappears. Shipping YES NO Ɣ Settings for [Button lock], [Controller user level] and [Controller ID function] will be back to [Off]. English 63

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
63
English
Power on screen delay
You can set the power-on delay time of the displays to
reduce the power load, when you press <Main Power
On / Off switch> to turn on the multiple displays that are
set together.
Set each display’s setting individually.
[Off]:
The display will be turned on at the same
time as <Main Power On / Off switch> is
pressed.
[AUTO]:
Sets the delay time automatically according
to the number set for [Display ID].
The delay time is determined by multiplying
[Display ID] x 0.3.seconds.
H²J² :KHQ >'LVSOD\ ,'@ LV » ĺ òÁ VHFRQGV
[1 to 30]:
Set the power-on delay time (second).
After pressing <Main Power On / Off
switch>, the display will be powered on with
time delay depending on this setting.
Note
Ɣ
During this function is working, the power indicator is
blinking green.
Ɣ
This function also works when the power recovers
from failure or after plugging off and in again the
power cord.
Clock display
Sets to display / hide the clock.
[Off]:
Hides the clock.
[On]:
Displays the clock.
Note
Ɣ
The clock is displayed at the lower left of the screen
when <RECALL> button is pressed.
Ɣ
When [Date and time] is not set, the clock is not
displayed even when [Clock display] is [On]. (see
page 54)
Power on message(No activity power
off)
Sets to show/hide [No activity power off] precautions at
the time the unit is turned on.
[On]:
The warning precautions are shown at the time
of power ON.
[Off]:
The warning precautions are not shown at the
time of power ON.
Note
Ɣ
This setting is enabled only when [No activity power
off] is [Enable] (see page 52).
Power on message(Power
management)
Whether to show/hide an information message that tells
the power has been turned off by Power Management
when the power is set to [On].
[On]:
The information is shown at the time of power
[On].
[Off]:
The information is not shown at the time of
power [On].
Note
Ɣ
This setting is enabled only when “Power
management” function is [On] (see page 51).
POWER button lock
Sets the lock setting for the display Main Power On / Off
switch.
[On]:
Main Power On / Off switch operation is
disabled.
[Off]:
Main Power On / Off switch operation is
enabled.
Note
Ɣ
This function is only for TH-43LFE8U, TH-48LFE8U,
TH-55LFE8U and TH-65LFE8U.
Initialization
When both main unit buttons and remote control buttons
are disabled due to the [Button lock], [Controller user
level] and [Controller ID function] settings, set all the
values [Off] so that all the buttons are enabled again.
Press <- (Unit)> together with <RETURN>
and hold for more than 5 seconds.
[Shipping] is displayed and the lock is released when
it disappears.
Shipping
YES
NO
Ɣ
Settings for [Button lock], [Controller user level]
and [Controller ID function] will be back to [Off].