Panasonic TH-58PZ700 Operating Instructions - Page 26

Technical Information Closed Caption (CC) •For viewing Closed Caption of digital broadcasting, set the aspect ratio to FULL. ••(If viewing with H-FILL, JUST, ZOOM or 4:3, characters will be cut off.) The Closed Caption is not displayed when you use HDMI connection. If analog connected equipment is used for displaying or recording, Closed Caption (CC) should be set On/Off on the connected equipment. The CC mode setting of the TV will not affect the analog input. If a digital program is being output in analog format, the CC data will also be output in analog format. If digital connected equipment is used for input, CC should be set On on either the connected equipment or the TV. If CC is set On on both the connected equipment and the TV, captions from each unit will overlap. Aspect Ratio Lets you choose the aspect depending on the format of the received signal and your preference. (p. 21) (e.g.: in case of 4:3 image) • FULL • JUST FULL JUST Enlarges the 4:3 image horizontally to the screen's side edges. (Recommended for anamorphic picture) • H-FILL Stretches to justify the 4:3 image to the four corners of the screen. (Recommended for normal TV broadcast) • 4:3 H-FILL Side bar Enlarges the 4:3 image horizontally to the screen's side edges. Standard The side edges of the image are cut off. (Note that "Image retention" of the side bar may occur from displaying it for a long time.) • ZOOM Note ZOOM •480i (4:3), 480i (16:9), 480p (4:3), 480p (16:9): •FULL, JUST, 4:3 or ZOOM 1080p / 1080i / 720p: •FULL, H-FILL, JUST, 4:3 or ZOOM When the signal is 720p/1080i/1080p, the aspect mode automatically defaults to Full after turning off the TV, Enlarges the 4:3 image to the entire screen. (Recommended for Letter Box) after changing input mode, or after changed signal resolution other than 720p/1080i/1080p. •Zoom adjust Vertical image position and size can be adjusted in "ZOOM". Select "Zoom adjust" on the "Picture" menu. (p. 28-29) V-position: Vertical position adjustment V-size: Vertical size adjustment •To reset the aspect ratio (OK) 50 Data format for SD Card browsing Photo: Data format: Max. number of files: Image resolution: Still images recorded with digital still cameras compatible with JPEG files of DCF* and EXIF** standards Baseline JPEG (Sub-sampling: 4:4:4, 4:2:2 or 4:2:0) 9,999 160 x 120 to 10,000,000 * DCF (Design rule for camera file system): A Japan Electronics and Information Technology Industries Association's standard Caution •• A JPEG image modified with a PC may not be displayed. Partly degraded files might be displayed at a reduced resolution. ** EXIF (Exchangeable Image File Format) Note • Folder structure viewed in PC DCIM Created automatically 100_PANA 3-digit folder number + 5-digit arbitrary characters P1000001.JPG P1000002.JPG P1000003.JPG •4-digit arbitrary characters + 4-digit file number Usable characters: 1-byte "a to z", "A to Z", "0 to 9," and "_" P1000004.JPG •• The folder and file names may be different depending on the digital camera used. For the suitable SD Memory Cards, please confirm the latest information on the following website. http://panasonic.co.jp/pavc/global/cs (This site is in English only) SD Card warning messages Message Meaning Is memory card in? • The card is not inserted. No file Cannot read file • The card has no data or this type of data is not supported. •• The file is broken or unreadable. The TV does not support the format. Cannot display image due to incorrect ID data. GalleryPlayer warning messages ••There is a problem with your TV decoder. If this message appears, please contact Panasonic Service Center for assistance. Refer to page 57, 59 (Limited Warranty), page 58 (Customer Services Directory) Cannot display image on SD card. • There is a problem with the data. Check the data inside the SD card. Cautions in handling SD Card: Do not remove the card while the unit is accessing data (this can damage card or unit). Do not touch the terminals on the back of the card. Do not subject the card to a high pressure or impact. Insert the card in the correct direction (otherwise, card may be damaged). Electrical interference, static electricity, or erroneous operation may damage the data or card. Back up the recorded data at regular intervals in case of deteriorated or damaged data or erratic operation of the unit. (Panasonic is not liable for any deterioration or damage of recorded data.) DIGITAL AUDIO OUT terminals You can enjoy your home theater by connecting a Dolby Digital (5.1 channel) decoder and "Multi Channel" amplifier to the DIGITAL AUDIO OUT terminals. Caution ••• Depending on your DVD player and DVD-Audio software the copyright protection function may operate and disable optical output. External speakers cannot be connected directly to PROG OUT terminals. When an ATSC channel is selected, the output from the DIGITAL AUDIO OUT jack will be Dolby Digital. When an NTSC channel is selected, the output will be PCM. 51 Technical Information FAQs, etc.