Panasonic TH42PH10UK 42" Plasma Television - Page 34

SET UP for MULTI DISPLAY 6 Press to select SEAM HIDES VIDEO. MULTI DISPLAY SETUP Press to select "OFF", "ON". MULTI DISPLAY SETUP OFF HORIZONTAL SCALE × 2 VERTICAL SCALE × 2 SEAM HIDES VIDEO OFF LOCATION A1 POWER ON SCREEN DELAY ON 7 Press to select LOCATION. MULTI DISPLAY SETUP Press to select the required arrangement number. (A1-D4 : Refer to the following) MULTI DISPLAY SETUP ON HORIZONTAL SCALE × 2 VERTICAL SCALE × 2 SEAM HIDES VIDEO OFF LOCATION A1 POWER ON SCREEN DELAY ON Display Number locations for each arrangement. (Examples) ( 2 × 1) ( 2 × 3 ) ( 4 × 2 ) ( 4 × 4 ) 8 POWER ON SCREEN DELAY Turning the power on for the multiple displays system, each display is turned on with a time lag to reduce the power load. Press to select POWER ON SCREEN DELAY. MULTI DISPLAY SETUP MULTI DISPLAY SETUP ON Press to select OFF or ON. OFF: All the display turns on simultaneously. HORIZONTAL SCALE × 2 VERTICAL SCALE × 2 SEAM HIDES VIDEO OFF ON: Each display turns on in the order of LOCATION. LOCATION A1 Delay time=LOCATION (difference from A1) × 1 sec. POWER ON SCREEN DELAY ON Example) Case of B2 in 4 × 2 A1, A2, A3, A4, B1, B2 5 sec. Notes: • This setting is valid when MULTI DISPLAY SETUP is ON. • During this function is working, the power indicator is blinking green. • This function also works when the power recovers from failure or after plugging off and in again the power cord. If unplugging and plugging the power cord while the unit is in standby mode and the power is being supplied to the board, each unit has time delay to start supplying the power to the attached board according to LOCATION, and the power indicator lights up red first and it turns orange when the power starts being supplied to the board. 9 Press twice to exit from SET UP. 34