Panasonic TH50PHD7UX TH37PWD7UX User Guide - Page 19

Adjusting PICTURE POSITION / SIZE PICTURE 1 POS. /SIZE Press to display the PICTURE POS. /SIZE menu. 2 Press to select H-POS / H-SIZE / V-POS / V-SIZE / CLOCK PHASE. INPUT SURROUND VOL N R 3 Press to adjust POS. / SIZE. PICTURE SOUND SET UP MULTI ZOOM PIP SWAP SELECT MOVE PICTURE POS. /SIZE ASPECT PC OFF TIMER During "VIDEO (S VIDEO)", "COMPONENT" and "DVI" input signal. 4 R Press to exit from adjust mode. Notes: • Adjustment details are memorized separately for different input signal formats (Adjustments for component signals are memorized for 525 (480) / 60i · 60p, 625 (575) / 50i · 50p, 1125 (1080) / 60i · 50i · 24p · 25p · 30p · 24sF, 1250 (1080) / 50i, 750 (720) / 60p · 50p each, and RGB/PC/DVI signals are memorized for each frequency.) • If a "Cue" or "Rew" signal from a VCR or DVD player is received, the picture position will shift up or down. This picture position movement cannot be controlled by the PICTURE POS. / SIZE function. • If adjusting the PICTURE V-POS / V-SIZE in Panasonic AUTO with FULL mode, the adjustment is not memorized. When exiting the mode, the screen will return to a former adjustment. PICTURE POS. /SIZE NORMALIZE H-POS H-SIZE V-POS V-SIZE NORMAL During "RGB / PC" input signal. PICTURE POS. /SIZE NORMALIZE NORMAL H-POS H-SIZE V-POS V-SIZE CLOCK PHASE H-POS Adjust the horizontal position. H-SIZE Adjust the horizontal size. V-POS Adjust the vertical position. V-SIZE Adjust the vertical size. CLOCK PHASE (RGB/PC in mode) Eliminate the flickering and distortion. Helpful Hint ( N / NORMALIZE Normalization) While the PICTURE POS. / SIZE display is active, if either the N button on the remote control is pressed at any time or the ACTION ( ) button is pressed during "NORMALIZE", then all adjustment values are returned to the factory settings. 19