Panasonic TXP50GT30B Operating Instructions - Page 97
Preparations, Features available, Analogue channel download, Direct TV Recording, Power on link
View all Panasonic TXP50GT30B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 97 highlights
Q-Link Preparations • Connect the DVD Recorder / VCR with the following logos: "Q-Link", "NEXTVIEWLINK", "DATA LOGIC (a trademark of Metz Corporation)", "Easy Link (a trademark of Philips Corporation)", "Megalogic (a trademark of Grundig Corporation)" or "SMARTLINK (a trademark of Sony Corporation)" • Q-Link connection (p. 95) • Use fully wired SCART cable. • Set up the DVD Recorder / VCR. Read the manual of the recorder. • Q-Link terminal setup in the Setup Menu [AV1 out] (p. 41) • Download Analogue channel setting "Analogue channel download" (see below) Features available Analogue channel download Analogue channel settings can be downloaded to a recorder with an analogue tuner (where Analogue is still broadcast). Digital •channel settings are not downloaded. To download the Analogue channel settings [Q-Link Download] (p. 41) or [Auto Setup] in Analogue mode (p. 49) or "Auto Setup" - when first using the TV (p. 13) Direct TV Recording - What you see is What you record • Recording the current programme on a DVD Recorder / VCR immediately. Available conditions: DIRECT TV REC Analogue Picture source freesat, DVB, Other Sat. / Satellite Mode TV AV TV Recording from TV monitor out Recorder's tuner TV monitor out AV (watching recorder's tuner) AV Recorder's tuner AV (watching recorder's external input) AV Recorder's external input AV (watching TV's external input) AV TV monitor out • When Direct TV Recording is performed, the recorder is automatically turned on if it is in • Standby mode. Changing channel or turning off the TV is available while the recorder is recording from its • own tuner. Changing channel is not available while the recorder is recording from the TV tuner. ■ To stop recording Unlock the tuner Tuner Locked Press EXIT to unlock and stop recording EXIT Power on link and Easy playback When the DVD Recorder / VCR starts playback or the direct navigator / function menu for the equipment is activated, the TV is turned on and the input mode is switched automatically so that you can view the content. (Only when the TV is in Standby mode.) Power off link When the TV is set to Standby mode, the recorder is also automatically set to Standby. (Only when the videocassette or disc is not active.) • This function will work even if the TV enters Standby mode automatically by auto power standby function. Note • Some recorders are not compatible. Read the manual of the recorder. Link Functions (Q-Link / VIERA Link) GUIDE 97