Panasonic TY-SP42P8W-K Installation Instructions - Page 2

English Safety Precautions CAUTION After installing the speakers, do not hold or move the display by lifting the speakers. • The mounting brackets may get damaged, and personal injury may result. Do not suspend the speakers. • Personal injury may result if the speakers fall off. Take particular care to ensure the safety of children. These speaker are for use with the Plasma Display. • If connecting them to some other amplifier, make sure that the maximum input is within the rated level(8W). If the input level is exceeded , fire may result. Make sure that all screws are tightened securely during installation. • Ensure that the installation is carried out correctly to prevent the speakers from becoming detached, and possibly causing possible personal injury. Accessories Mounting bracket Bracket mounting Sponge 2 Speaker cable (right 2 screw 12 (20 cm 2 Mounting bracket (left 2 Installation Installing to the Plasma Display 1. Attach the sponges to the speakers. Trim Sponges rib 2. Attach the mounting brackets to the speakers. Speaker (right) Speaker (Ieft) Mounting brackets (right) Mounting brackets (left) For right Side of the speaker For left • Attach the sponges to the surfaces which are in contact with the Display. • Clean the surfaces before attaching the sponges. • Attach the sponge along the rib on the speaker. 2 Bracket mounting Bracket mounting screws screws • Secure the top and bottom mounting bracket by tightening the bracket mounting screw. • As shown in the enlarged views, adjust the speakers so that there is some clearance between them and the display by sliding the right speaker to the right, and the left speaker to the left, and then secure the bracket mounting screws. • Securely tighten the bracket mounting screws.