Panasonic Toughbook 31 Operating Instructions - Page 15
Attaching the stylus to the computer only for model with, touchscreen, Opening the Display, Connect - battery
View all Panasonic Toughbook 31 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
2 3 1 4 5 1 2 Attaching the stylus to the computer (only for model with touchscreen) Use the tether to attach the stylus to the computer so you will not lose it. There are holes (A) to attach it. 1 3 2 4 CAUTION Do not pull the tether with excessive force. The stylus may hit the computer, person's body or other objects when released. 3 Opening the Display A Push and hold the latch (A), and lift open the display. 4 Connect your computer to a power outlet. The battery charging starts automatically. CAUTION Do not disconnect the AC adaptor and do not switch the wireless switch to on until the first-time operation procedure is completed. When using the computer for the first time, do not connect any peripheral device except the battery pack and AC adaptor. Handling the AC adaptor Problems such as sudden voltage drops may arise during periods of thunder and lightning. Since this could adversely affect your computer, an uninterruptible power source (UPS) is highly recommended unless running from the battery pack alone. 5 Turn on the computer. A Slide and hold the power switch until the power indicator lights. CAUTION Do not slide the power switch repeatedly. The computer will forcibly be turned off if you slide and hold the power switch for 4 seconds or longer. Once you turn off the computer, wait for 10 seconds or more before you turn on the computer again. Do not perform the following operation until the hard disk drive indicator turns off. Connecting or disconnecting the AC adaptor Sliding the power switch 15 Getting Started