Panasonic UF-780 Panafax - Page 69

Basic Operations Substitute Memory Reception Receiving Documents If the recording paper runs out or jams or if the toner runs out during reception, the machine automatically starts receiving documents into its image data memory. Stored documents are printed automatically after replacing the recording paper or the toner cartridge. (See Note 1 and 2) 1 When the machine finishes the memory reception and there is no recording paper or toner, an Information Code appears on the display. NO RECORDING PAPER INFO. CODE=010 OUT OF TONER INFO. CODE=041 2 Install the recording paper (See page 18) or replace the toner cartridge (See page 16). * PRINTING * The machine will automatically start printing the document stored in the memory. MEMORY RCV'D DOC Print Collation Mode The printing mechanism of the machine is a Reverse Order Stacking construction. The machine has Print Collation Mode that stacks received documents in the correct order. When the Print Collation Mode is enabled, all received documents are stored into memory first, then printed out in Correct Order Stacking. The requirements for the Print Collation Mode to be active are: 1) Fax Parameter No. 65 PRINT COLLATION set to "Valid", and 2) enough remaining memory. The unit will print in Reverse Order Stacking (Non-Collation Mode) whenever one of the above requirements is not met. To use this function, we recommend installing an Optional Flash Memory Card. See page 147 (Options and Supplies). Sending Document Order Stacking Document Order Correct Order Stacking (Collation Mode) Reverse Order Stacking (Non-Collation Mode) 1 2 3 1 2 3 3 2 1 NOTE 1. If the memory overflows, the machine will stop receiving and release the communication line. The document(s) stored in the memory up to that moment will be printed out. 2. If you wish to turn off the substitute reception function, change the setting of Fax Parameter No. 22 to "Invalid". (See page 37) 69