Panasonic VB44030 VB44030 User Guide - Page 145

Section 700 - Operation Chapter 7. SLT Features To retrieve a transferred call park: Action Result 1. At the extension with the transferred park call, lift the handset or press the ON/OFF key. 2. Enter Call Park Answer/Self access code (default = 772). Intercom dial tone • CO TALK TRK #XX displays (where XX = line number) • Connected to parked call Hardware Requirements • N/A Related Programming • FF1 (System): Extension Park Hold Recall Timer • FF1-0-02: Dial Control for Floating Hold Answer Considerations • You cannot park more than one call at a time. • Call Park functions can be assigned to FF keys (see "Flexible Function Keys" on page 5-45). • No more than one Call Park Answer key may be assigned to a single telephone. • A Call Park Answer key may not be assigned to the EM/24 or DSS/72 console. • If a call is parked by Call Park key, the LED flashes. • LCD softkeys are also available for Call Park. • Once a call is parked, it cannot be accessed by the CO line key or direct CO access (similar to exclusive hold). • If two calls are on hold and the last call is parked, the other call is then considered the last held call. If a transfer is performed, the remaining held call would be the call transferred, not the parked call. • Depending on the Station Park/Floating Hold Pickup setting (FF1-0-02-0025), the station park/ floating hold pickup code can set to *9 (default), 773. The floating hold pickup code (*9) operates as follows: System Size 96 Virtual Line Number and Operation 01-09 Floating Hold pick up 10-96: For Station Park Hold pick up purpose Call Pickup Description The System allows the following types of call pickup: • Extension Group Pickup • Extension Direct Pickup 576-50-700 DBS 576HD (USA) issued September 2001 5-23