Panasonic VDRM70PP Dvd Camcorder - Page 159
During recording, Symptom, Cause and Correction, Reference
View all Panasonic VDRM70PP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 159 highlights
During recording Symptom Cause and Correction Pressing the REC button Is input image copy-guarded? will not start recording. Copy-guarded image cannot be recorded on this DVD Video Camera. Recording starts but stops immediately. Is disc scratched or do dirt or fingerprints adhere to it? Clean the disc. If there is still no improvement, replace the disc. If you turn this DVD Video Camera on for many hours in a high temperature location, this DVD Video Camera may automatically stop recording for the protection of the lens in the laser pickup assembly. In this case, follow the messages on the display of this DVD Video Camera. To start recording again, turn this DVD Video Camera off and leave it for a while. Is some other AV device directly connected to the AV input/output jack of this DVD Video Camera? If the AV device is connected via several other devices, such as AV selector, the video signal may be transmitted incorrectly. In such a case, reduce the number of devices through which the video signal is transmitted, or connect AV device directly. Are you attempting to record an image from a video game or PC? From some video games or PCs, images cannot be recorded on this DVD Video Camera. LCD screen is hard to Has brightness of LCD screen been adjusted? see. Stop recording and adjust the brightness. Is the DVD Video Camera being used outdoors? Use the viewfinder. When using LCD monitor, adjust its angle so that LCD screen is not exposed to direct sunlight. Focus is not correct. Is it difficult to use auto focus with your subject? Focus manually. Does "MF" appear? The DVD Video Camera is set to manual focus. Focus the subject manually, or release manual focus. Is the diopter control correctly adjusted if you are using the viewfinder as a monitor? Adjust the diopter control. In cases other than the above, set the power switch to "OFF", and then set it to " ", " " or " " again. Some vibrations are felt These vibrations or sound are caused by disc drive: This does not or slight sound is heard indicate a fault. from mechanism. Reference page 75 74 75 75 91 38 65 64 37 50 159