Panasonic VP-16-V2 VP-8-V2 Quick Start Guide - Page 9

VP-8-V2 and VP-16-V2 Series Encoder · Quick Start Guide 2.3 Access to VP-8-V2 and VP-16-V2 ENCODER via Web Browser Steps: 1. Power on the encoder, and connect the encoder to the network. 2. Input the IP address into the address bar of the web browser, and click Enter to enter the activation interface. The default IP address of the network encoder is 192.0.0.64. You are recommended to change the default IP address after your access. 3. Default username is admin Default password is 12345. The V2 ENCODER can also be accessed by WEB Browser for configuration and operation. The supported WEB browsers include: Internet Explorer 6/7/8/9 and above, Firefox 3.5 and above, Chrome 8 and above, Safari 5.0.2 and above. Open WEB browser, input the IP address of V2 ENCODER (e.g., http://192.0.0.64) and then press the Enter key on PC. The login interface is displayed. When the HTTPS feature is enabled, the system will use the HTTPS login mode (e.g., https://192.0.0.64) by default. You can also input http://IP address/index.asp (e.g., http://192.0.0.64/index.asp) if you want to use HTTP mode to log into the device. Figure 2. 1 Login Interface Input the user name and password to log into the system. 9