Panasonic VW-BN1 Dvd Burner - Page 12

∫ Connection and recognition procedures ≥ Connect this unit to the AC adaptor. 1 Connect this unit to the PC. A AUSB cable (supplied with the Camcorder) ≥ This unit is recognized as a [DVD-RAM Drive] on [My Computer]. ≥ Insert the plugs as far as they will go. The unit and PC will not operate properly if they are not inserted fully. ≥ Be sure to use the USB cable supplied with the Camcorder. (We cannot guarantee operation if you use a USB cable other than the one supplied with the Panasonic Camcorder.) 2 Start copying/playback. ≥ Use the software supplied with a Panasonic Camcorder to copy/play back the motion video/pictures. ≥ Read the operating instructions of the software for information about how to copy/play back. ∫ To disconnect the USB cable safely If the USB cable is disconnected while the access lamp is lit, this unit may malfunction and the data may be lost. 1 Check that the access lamp is not lit. 2 Double click the ( ) icon in task tray. ≥ Hardware disconnect dialogue appears. ≥ Depending on your PC's settings, this icon may not be displayed. 3 Select [USB Mass Storage Device] and click [Stop]. 4 Click [OK]. ≥ Click [OK], and you can safely disconnect the cable. 12 LSQT1268 (ENG)