Panasonic VW-BN1 Dvd Burner - Page 15

¬ Troubleshooting Problem Check points This unit cannot be turned on. ≥ Is the AC adaptor connected? > Connect the AC adaptor and the AC cable correctly. (P9) This unit cannot be ≥ Disconnect the AC adaptor and then about 1 minute later operated even when connect it again. (Conducting the above operation when the powered up. access lamp is on may destroy the data on the disc.) If normal This unit does not operate normally. conditions are not restored, detach from the connected power source and consult the dealer who you purchased this unit from. ≥ The disc will not eject unless this unit is powered. > Connect the AC adaptor. ≥ The [ Wipe off the dirt on the disc. (P7) If the disc is scratched, Copying stops. insert a new one. ≥ The internal temperature of this unit is high. Disconnect the AC The playback motion adaptor, wait a short while and then you will be able to use this video/pictures breaks up unit again. for a moment. ≥ Discs recorded on other devices may not be correctly read or played back on this device. ≥ Has the DVD-RW, DVD-R or DVD-R DL been finalized? > After finalizing, the discs become play-only and cannot Cannot copy although power is supplied to this unit and the disc is correctly inserted. record. If you un-finalize a DVD-RW, it can be used for recording. (If you un-finalize a DVD-RW and then use it again when copying from a compatible Panasonic Camcorder, the recorded scenes may be deleted.) ≥ Is the memory of the disc full? > If there is no more available memory, delete unnecessary scenes with the PC or use a new disc. 15 (ENG) LSQT1268