Panasonic WJ-ND400/1000 Quick Reference - Page 1

ND400_A3_E.fm 1 Play back Recorded Images Play back recorded images. Select the camera channel you want to playback and click the [PLAY] button. Plays back recorded images. [ ] is displayed in the status display area. • Playback resumes from the date and time when playback was stopped. Click the [STOP] button to stop playback. [ ] disappears from the Status display area and a live image from the camera is displayed in the Image display. Click the [Go to date] button in the Playback point operation area. This displays the [Go to date] window. Select the date and time of the image to [ ] is displayed in the status display play back and then click the [PLAY] area and images at the specified date button. and time are played back. ʢʣ Playback point operation area Control the playback of recorded images from the [HDD] tab. (1) [FF]/ [REW] : Plays recorded images forward or in reverse at high speed. The playback speed changes each time the button is clicked. (Approximately 4x J 8x J 16x J 32x J 48x J 96x) (2) [NEXT RECORD]/ [PREV RECORD] : Skips forward or backward to play the recorded image of the next event. (3) [NEXT : Click during playback or when paused to play IMAGE]/[PREV one frame at a time forward or backward, or to IMAGE] pause. [HDD] Tab Search for and Playback Images Search for and play back recorded events (REC event search). Click the [Control] button and then click [Search] button in the [Search] box. • This will display the [Select search method] screen. Click the [Rec event search] button. (1) • This displays the [Rec event search] window. Narrow the conditions. Select the "Time & date", "Rec event", and "Camera" for the images you want to playback and then click the [OK] button. • [FILTERING] is displayed on the status display area and the filtered results are displayed on the recorded event list window. • Click the [All List] button to eliminate all the search conditions. Click the recorded event time you want to play back. The selected images are played back. Click the [STOP] button to stop playback. (3) (1) (2) (3) (2) (4) 3TU001890AAA AM0408-0 Network Disk Recorder WJ-ND400 Quick Reference Guide The Quick Reference Guide provides simple explanations for operating the product. Network Settings Set the IP address, subnet mask, and other network settings for each port. LCD z Factory default network settings Item PT#1 Camera port PT#2 Client PC port PT#3 Maintenance port DHCP - OFF - IP address 192.168.0.250 192.168.1.250 192.168.2.250 Subnet mask 255.255.255.0 255.255.255.0 255.255.255.0 Gateway - 192.168.1.1 - HTTP - 80 - Arrow buttons ESC button SET button z IP Address Settings Screen [SET] z How to configure network settings Use the arrow buttons (up or down) on the date display screen to display the [IP Address Setup] and then press the [SET] button. • The cursor is shown as an under bar (_). Switch to the settings screen. • When the cursor changes to ">": Arrow buttons (left or right): Select port Arrow buttons (up or down): Select item Click the [SET] button when the cursor is The cursor moves to the number area. [>]. Move the cursor with the arrow buttons (left or right) to configure the settings. • Arrow buttons (left or right): Move the cursor • Arrow buttons (up or down): Input a value Press the [ESC] button to move the cursor to ">" and check the settings. Press the [ESC] button again to return to the date display screen. Display the Operating Window Display the operating window from a web browser on a PC. Launch the web browser, input the main The authentication screen opens. unit's IP address, and press the [Enter] key. Enter your user name and password to login. • Initial default User name: ADMIN Password: 12345 This will display the top page. • The wizard for installing ActiveX control, which is required to display images from cameras, opens. Follow the instructions of the wizard.