Panasonic WJ-ND400/1000 Quick Reference - Page 2
Control Items, Basic Setup, Monitor Live Images, Control the Camera, Manual recording
View all Panasonic WJ-ND400/1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
ND400_A3_E.fm 2 Control Items (2) (3) (4) (1) (9) (8) (5) (1) [Control] button Search for and play back recorded images, as well as switch camera channels. (2) [Cam. Select] button Switch camera channels for the image displayed. (6) (3) [Setup] button Set up the recorder. (4) Status display area Display the recording and playback status of recorded images. (5) Current time display area (7) Displays the current time. (6) Image display Display live and recorded images. (7) Playback point operations area Specify the current position in an image being played back, and play back the most recent image. (8) [HDD] tab Control playback of recorded images. (9) [CAM] tab Control zoom, focus, and automatic functions of the camera. Basic Setup Set up the minimum settings necessary to use the recorder. (Ι) Set the current date Click the [Setup] button, and then click This will display the "Quick" menu. [Quick]. Set up the current time and date. Under "Time & date", click the [Set] (2) button (1) (3) (ΙΙ) Register the cameras Select the network port for detecting cameras. Use the camera auto-registration item to specify whether a detected camera should be assigned an IP address. Click the [Registration] J [OK] buttons. Check the results of the recording and click [OK]. Select camera port or client PC port. Select [Register the IP address automatically given by this unit to a detected camera] or [Register the IP address set with a detected camera]. A "Camera registration result" window will appear after registration is complete. Up to 64 cameras can be registered. • If a camera you want to register is not detected or if you want to change the settings of a camera, do it in "NW camera" set up. (ΙΙΙ) Programming When cameras have been registered, the live video and manual recording rate settings of the "Program1" page are set to 1ips. Click the [Display] button to check programming details. Monitor Live Images Display live images on a 1-screen or on a 4-screen (multiscreen). Click the [Cam. select] button. The camera list is displayed in the [Camera select] box. Click [WJ-ND400] and select in order The live image from the selected the camera group title and camera title. camera channel is displayed on a 1- screen. Click the [Multiscreen] button. The camera image is displayed on 4 separate screens. • Each clicking the [Multiscreen] button switches the 4-screen displays. Display live images in the sequential display. Click the [Cam. select] button and then click the [Sequence] button. Click the [Sequence] button again. Live images are displayed in the sequential display. • The [Sequence] button indicator lights green and [SEQ] is displayed on the Status display area. The [Sequence] button indicator goes off and the sequence operation is stopped. Control the Camera You can control cameras that can pan and tilt from the [CAM] tab. (1) [Zoom] (2) [Focus] (3) [Auto mode] (4) [Control buttons] [Control pad] (5) [Brightness] (6) [Preset] : Zoom in/out the image from the camera. : Adjust the focus point of the image. : Select the camera's automatic mode function. : Adjust the direction of the camera. : The pan/tilt movement increases as you move from the center of the pad to the edges. : Adjust the lens iris. (brightness) : Registers the preset positions of camera and moves the camera to the registered preset positions. [CAM] Tab (1) (2) Manual recording You can record manually. Click the [S] button in the [REC] box on the [HDD] tab. Click the [Recording] button. Click the [Recording stop] button. Click the [S] button until the [Recording] and [Recording stop] button are displayed. In the status display " [REC]" lights red, and recording starts. In the status display " [REC]" turns off, and recording stops. (3) (4) (5) (6) (1) (2) (3)