Panasonic WJND300 WJND300 User Guide - Page 5

Preparations, Connections, Performing the network settings of the network disk recorder, Performing

Page 5 highlights

Adobe® Reader: Adobe® Reader should be installed on a PC to read these operating instructions. When the Adobe® Reader is not installed on the PC, download the latest Adobe® Reader from the Adobe web site and install it. Notes: • This software must be installed or started by the administrator. Otherwise, any problems will not be covered by the warranty. • In these operating instructions, the settings are performed on Windows XP as examples. Preparations It is necessary to complete the connections between a PC and the network disk recorder and perform the network settings of the PC and the network disk recorder respectively. Connections There are 2 methods to connect a PC and the network disk recorder: • Connecting a PC and the network disk recorder directly • Connecting a PC to the network disk recorder via a hub or a router When connecting a PC to the network disk recorder, the required hardware and cables are different depending on the system configuration. Prepare before starting connection. Refer to the Setup Instructions (PDF) of the network disk recorder for descriptions of how to perform the network settings. Performing the network settings of the network disk recorder Use the buttons on the front panel of the network disk recorder or a web browser on the connected PC to conform to the network settings to the network environment of the PC. Refer to the Setup Instructions (PDF) of the network disk recorder for further information about the network settings. Performing the network settings of a PC Change the TCP/IP setting of the PC on which this software is to be installed to conform to the network settings of the network disk recorder. It is required to set the IP address of the PC to "192.168.1.XX (a number from 2 to 254)" to access the network disk recorder. Refer to the Installation Guide (book) and the Setup Instructions (PDF) of the network disk recorder for descriptions of how to perform the network settings of a PC. 5

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27

5
Preparations
It is necessary to complete the connections between a PC and the network disk recorder and perform the network
settings of the PC and the network disk recorder respectively.
Connections
There are 2 methods to connect a PC and the network disk recorder:
Connecting a PC and the network disk recorder directly
Connecting a PC to the network disk recorder via a hub or a router
When connecting a PC to the network disk recorder, the required hardware and cables are different depending on
the system configuration. Prepare before starting connection.
Refer to the Setup Instructions (PDF) of the network disk recorder for descriptions of how to perform the network set-
tings.
Performing the network settings of the network disk recorder
Use the buttons on the front panel of the network disk recorder or a web browser on the connected PC to conform to
the network settings to the network environment of the PC.
Refer to the Setup Instructions (PDF) of the network disk recorder for further information about the network settings.
Performing the network settings of a PC
Change the TCP/IP setting of the PC on which this software is to be installed to conform to the network settings of
the network disk recorder.
It is required to set the IP address of the PC to "192.168.1.XX (a number from 2 to 254)" to access the network disk
recorder.
Refer to the Installation Guide (book) and the Setup Instructions (PDF) of the network disk recorder for descriptions
of how to perform the network settings of a PC.
Adobe
®
Reader: Adobe
®
Reader should be installed on a PC to read these operating instructions. When the Adobe
®
Reader is not installed on the PC, download the latest Adobe
®
Reader from the Adobe web site and install it.
Notes:
This software must be installed or started by the administrator. Otherwise, any problems will not be covered by
the warranty.
In these operating instructions, the settings are performed on Windows XP as examples.