Panasonic WVCW474F WVCW474F User Guide - Page 2

FEATURES 1. The following functions are built in. (1) Auto Light Control (ALC) (2) The SUPER-D2 function eliminates interference by strong background lighting which makes the camera picture dark, such as a spotlight. Dynamic range of 46 dB (Typ) (3) Internal, Line-Locked, Multiplexed Vertical Drive (VD2) Sync (4) Auto/Manual White Balance Function (5) Electronic Shutter Function 2. Signal-to-noise ratio of 50 dB (Equivalent to AGC Off) 3. Minimum illumination of 2.4 lx (0.24 footcandle) (WIDE) (Color mode) Minimum illumination of 0.3 lx (0.03 footcandle) (WIDE) (Black-and-white mode) Minimum illumination of 0.8 lx (0.08 footcandle) (WIDE) with the WV-CW1C optional dome cover (Color mode) Minimum illumination of 0.1 lx (0.01 footcandle) (WIDE) with the WV-CW1C optional dome cover (Black-and-white ) 4. 480 lines of horizontal resolution (Color mode) 570 lines of horizontal resolution (Black-and-white mode) 5. High quality picture: (a) 2H type vertical enhancer for greater picture sharpness (b) Chroma averaging circuit for better color signal-to-noise ratio (c) Minimum of aliasing on fine objects (d) Expanded dynamic range by use of knee circuit (e) Highlight aperture correction for greater picture detail of bright objects 6. Selectable electronic sensitivity enhancing modes including AUTO, MANUAL and OFF 7. Built-in Digital Motion Detector 8. Auto black-and-white mode enables the camera to switch between color and black-andwhite picture in response to Light input. 9. Electronic zoom function magnifies a scene 2-fold and changes the angle of view. MAJOR OPERATING CONTROLS AND THEIR FUNCTIONS q w e r y t u LEFT i R IGHT o UP !0 DOWN !1 SET !5 !4 !3 !6 !2 LOW OFF SHARP OFF INT HIGH AUTO1 SOFT ON LL !7 q Panning table Adjusts the panning angle of the camera. w Pan lock screw Fixes the panning position. e Tilting lock screw Fixes the tilting position. r AZIMUTH (Angle adjuster) Shoots in a straight-angle field of view when aiming at an object in a slanting direction even if the tilt angle has been set. t Zoom lock lever Fixes the zoom position. y Focus lock lever Fixes the focus position. u LEFT button (I) (L) Moves the cursor to the left, selects the mode and adjusts some levels.