Panasonic XE9WKUA Operating Instructions - Page 7

To select Room Freeze Protection RFP See "To learn more..." for details. • When selected, the unit will circulate the air in High mode for monitoring the temperature. When the sensor detects the temperature drops below 46 °F / 8 °C the compressor/heat pump operation begins, when the temperature reaches 50 °F / 10 °C, the compressor stops and repeat this cycle. To connect network • For Wireless LAN Module operation setup, please refer to Setup Instructions Manual. To set the timer 2 sets of ON and OFF timers are available to turn ON or OFF the unit at different preset time. 1 2 3 1 Select ON or OFF timer • Each time pressed: (exit setting) Example: OFF at 22:00 2 Set the time • To cancel ON or OFF timer, press or to select respective or then press . • If timer is cancelled manually or due to power failure, you can restore the timer again by pressing or to select respective or then press . • The nearest timer setting will be displayed and will activate in sequence. • Timer operation is based on the clock set in the remote control and repeats daily once set. For clock setting, please refer to Quick Guide. 3 Confirm How to use English Note POWERFUL , • Can be selected at the same time. • Can be activated in all modes. • Can be cancelled by pressing the respective button again. ACXF55-27111_FC1219-1.indb 7 , POWERFUL FAN SPEED/ QUIET • POWERFUL, QUIET and FAN SPEED cannot be selected at the same time. 7 11/21/2019 2:56:52 PM