Panasonic ew3122s EW3122 User Guide - Page 12
Setting, Checking, Measurement, Notification
View all Panasonic ew3122s manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
SETTING (CHECKING) THE MEASUREMENT NOTIFICATION TIME (CONTINUED) 2 OFF 4 5 ()Press the Set button "1". The minute value will blink. C)Press the Change button "2" repeatedly to set the desired minute. • To set only Notification Time 1, press the On/Off Start button to complete the setting. • To set Notification Times 2 and 3, follow steps 6 and 7 below. 6 Press the Set button "1". Notification Time 2 will blink. Repeat steps 2 to 5 to set the desired notification time. 3 ofcr 4 7 When setting of Notification Time 2 has been completed, press the Set button "1". Notification Time 3 will blink. Repeat steps 2 to 5 to set the desired notification time. On/Off hart 8 When setting of Notification Time 3 has been completed, press the Set button "1". The times set for Notification Times 1 to 3 will be shown automatically at 2 second intervals. 9 To complete the setting, press the On/Off Start button. 21 SETTING (CHECKING) THE MEASUREMENT NOTIFICATION TIME (CONTINUED) To change the notification time setting: Press the Set button "1" on the top surface of the blood pressure monitor. (Notification Time 1 will blink.) • To change the setting for Notification Time 2 or 3, press the Change button to display Notification Time 2 or 3. 2 Press the Set button "1" twice. The hour value will blink. 3 Press the Change button "2" repeatedly to set the desired hour. 4 C) Press the Set button "1". The minute value will blink. C) Press the Change button "2" repeatedly to set the desired minute. 5 Press the On/Off Start button to complete the setting. To cancel the measurement notification sound: Press the Set button "1" on the top surface of the blood pressure monitor. (Notification Time 1 will blink.) • To change the setting for Notification Time 2 or 3, press the Change button "2" to display Notification Time 2 or 3. 2 Press the Set button "1" once. The 4), and on will blink. 3 Press the Change button "2". oFF will be displayed. 4 Press the On/Off Start button to complete the setting. • When the set time is reached, the measurement notification sound will sound to notify you that it's time to take a measurement. • If the set time is reached in the middle of taking a measurement, the measurement notification sound will not sound. • When the measurement notification sound sounds, it can be stopped by pressing the On/Off Start button. If the button is not pressed, the sound stops after 1 minute. • If you store it in a desk, you may not be able to hear the indicator sound. Advice: If a record table is made out with the measurement values taken around the same time, you can easily see your own daily blood pressure changes. 22