Paradigm GO10SW Garden Oasis Satellites Manual - Page 16

AUDIO SETTINGS CHART INSTALLATION USING LONG WIRES (100 feet or longer) CHANNEL #1 ON AMP CHANNEL #2 ON AMP PRESETS ON CROWN AMP Wire Product to Channel #1 on the Crown Amplifier Wire Product to Channel #2 on the Crown Amplifier Select the Preset number on the Crown Amplifier specified below GO10SW GO4 Preset 2 for GO10SW and GO4 GO10SW or GO12SW plus GO4 or GO6 satellite speakers GO10SW GO12SW GO6 Preset 3 for GO10SW and GO6 GO4 Preset 4 for GO12SW and GO4 GO12SW GO6 Preset 5 for GO12SW and GO6 GO4 NO subwoofer and GO6 GO4 or GO6 satellite speakers GO4 GO6 GO4 Preset 10 for GO4 in Mono GO6 Preset 11 for G06 in Mono GO4 Preset 12 for GO4 in Stereo GO6 Preset 13 for GO6 in Stereo PRESET NAME GO4_10SW GO6_10SW GO4_12SW GO6_12SW GO_4_MO GO_6_MO GO_4_ST GO_6_ST POWER OUTPUT Signal level provided to subwoofer / speakers 8 ohm / 70V hybrid 8 ohm / 70V hybrid 8 ohm / 70V hybrid 8 ohm / 70V hybrid SET DIAL ON SATELLITE SPEAKER Remove the cap from the rear of the satellite speaker and position the dial to the appropriate wattage setting below Speakers: 1-12 30W (or less) Speakers: 13-24 15W (or less) Speakers: 25-50 7.5W (or less) Speakers: 50-100 3.8W (or less) NA / 70V NA / 70V NA / 70V NA / 70V Speakers: 1-12 30W (or less) Speakers: 13-24 15W (or less) Speakers: 25-50 7.5W (or less) Speakers: 50-100 3.8W (or less) INSTALLATION USING SHORT WIRES (less than 100 feet) FOR 4 OR FEWER SPEAKERS CHANNEL #1 ON AMP CHANNEL #2 ON AMP PRESETS ON CROWN AMP PRESET NAME POWER OUTPUT Wire Product to Channel #1 on the Crown Amplifier Wire Product to Channel #2 on the Crown Amplifier Select the Preset number on the Crown Amplifier specified below Signal level provided to subwoofer / speakers GO10SW or GO12SW plus 4 or less GO4 or GO6 satellite speakers GO10SW GO10SW GO12SW GO12SW GO4 Preset 6 for GO10SW and GO4 8GO410SW 8 ohm / 8ohm GO6 Preset 7 for GO10SW and GO 6 8GO610SW 8 ohm / 8ohm GO4 Preset 8 for GO12SW and GO4 8GO412SW 8 ohm / 8ohm GO6 Preset 9 for GO12SW and GO6 8GO612SW 8 ohm / 8ohm SET DIAL ON SATELLITE SPEAKER Remove the cap from the rear of the satellite speaker and position the dial to the appropriate wattage setting below 8ohms GO4 No Subwoofer and 4 GO6 or less GO4 or GO6 satellite speakers GO4 GO6 15 | EN GO4 Preset 14 for GO4 in mono 8GO_4_MO NA / 8ohm GO6 Preset 15 for GO6 in mono 8GO_6_MO NA / 8ohm GO4 Preset 16 for GO4 in stereo 8GO_4_ST NA / 8ohm GO6 Preset 17 for GO6 in stereo 8GO_6_ST NA / 8ohm 8ohms