Paradigm GO10SW Garden Oasis Satellites Manual - Page 7

WIRING & SPEAKER INSTALLATION Mono Setup Using 4 Conductor Burial Cable & Crown Amplifier GOSW10 Mono Mono Mono OR GOSW12 Mono Mono Mono Preparing the 4 Conductor Burial Cable 1. Starting with the first speaker and every speaker/ sub that comes after, create a loop approximately 6" in length. 2. Recommended: Use a wire tie (not included) to keep the wire loop intact and act as a strain relief. 3. Use a Round Cable Stripper to remove the outside protective cable jacket to expose the four color-coded wires. Separate the wire loops as shown. Wires for Speaker red (+) & black (-) Wires for Subwoofer white (+) & green (-) 4. Cut the red (+) and black (-) wires with cable strippers and strip off 1 inch (25.4mm) of insulation from the ends if the wires to expose the copper conductor. EN | 6