Paradigm Persona 3F Persona Series Manual - Page 29

Basic Arc Measurement, Advanced Users, Anthemav.com/arc, Printing A Report

Get Paradigm Persona 3F PDF manuals and user guides View all Paradigm Persona 3F manuals
Add to My Manuals
Save this manual to your list of manuals

Page 29 highlights

ANTHEM ROOM CORRECTION (ARC) - Persona 9H Only (cont'd) BASIC ARC MEASUREMENT 1. With your microphone set in Position One, the "main measurement position," use the USB to connect both the microphone and the ARC-ready equipment being measured to a USB input on your computer. 2. Run ARC by selecting it from the Start Menu. The program will guide you through the measurement steps. At the end of the process, ARC will automatically load the room correction data to your equipment. The process takes about 10 minutes depending on the number of measurements. 3. You can name the measurement data file saved to your computer. Up to 16 characters may be used to name a measurement. Additional characters will be removed. Valid naming characters are: a-z, A-Z, 0-9 and "@". Other characters will not be allowed. 4. Once the ARC program is finished, you can disconnect your computer. You can break down and store the microphone set safely for future use. 5. Use the ARC button, on the rear of the speaker, to toggle between the pre and post ARC correction. • If the positions of your speakers change, or if new furniture or other sound-reflective materials are introduced into the room, or your main listening position changes, you will have to re-measure. • If you are using multiple speakers, you must repeat the process for each one. ADVANCED USERS One of the incredible features of ARC is that it gives you the tools to customize your room response curves. This is recommended only for more advanced users. For the latest instructions for advanced users, please visit anthemav.com/arc. PRINTING A REPORT To print a copy of your graphics and targets, click on Print. Sample ARC Analysis/Correction 24

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
24
ANTHEM ROOM CORRECTION (ARC)
–
Persona 9H Only
(cont’d)
BASIC ARC MEASUREMENT
1.
With your microphone set in Position One, the “main measurement position,” use the USB to connect both the
microphone and the ARC-ready equipment being measured to a USB input on your computer.
2. Run ARC by selecting it from the Start Menu. The program will guide you through the measurement steps. At the end
of the process, ARC will automatically load the room correction data to your equipment. The process takes about 10
minutes depending on the number of measurements.
3. You can name the measurement data file saved to your computer. Up to 16 characters may be used to name a
measurement. Additional characters will be removed. Valid naming characters are: a-z, A-Z, 0-9, “ “, “-”, “.”, “:”, “;”, “<”,
“=”, “>”, “?”, and “@”. Other characters will not be allowed.
4. Once the ARC program is finished, you can disconnect your computer. You can break down and store the microphone
set safely for future use.
5. Use the ARC button, on the rear of the speaker, to toggle between the pre and post ARC correction.
•
If the positions of your speakers change, or if new furniture or other sound-reflective materials are introduced into the
room, or your main listening position changes, you will have to re-measure.
•
If you are using multiple speakers, you must repeat the process for each one.
ADVANCED USERS
One of the incredible features of ARC is that it gives you the tools to
customize your room response curves. This is recommended only for more
advanced users.
For the latest instructions for advanced users, please visit
anthemav.com/arc
.
PRINTING A REPORT
To print a copy of your graphics and targets, click on
Print
.
Sample ARC Analysis/Correction