Paradigm Signature S6 Manual - Page 5
Fig. 5a, Fig. 5c, Fig. 5b
View all Paradigm Signature S6 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
Fig. 5a For Center Channels with Outrigger Feet Fig. 5b For Center Channels with Cradles USE OF THIS TILT BRACKET IS RECOMMENDED, BUT OPTIONAL Note: Bracket not for use with a Paradigm Stand STEP 1 Remove grille. To prevent scratching the finish, carefully lay the speaker on a blanket or soft drop cloth with cradles positioned for easy access, as shown. STEP 2 Position bracket over cradle, as shown. Align rear posts in bracket with rear holes in cradle (see inset). Press down firmly to engage posts. Front posts will automatically align. STEP 3 Push down firmly with both thumbs where indicated (see inset) and bracket will snap into place. Repeat steps 1 to 3 for second bracket. IMPORTANT! Should you wish to remove the tilt bracket at a later date, you must unscrew the entire cradle/tilt bracket assembly. DO NOT attempt to pry off the bracket as this will damage the cradle. Fig. 5c Attaching the Tilt Bracket when the Center Channel is positioned below a Television/Display - included on models with cradles only 5