Pentax 39554 *ist Manual - Page 146
Troubleshooting
UPC - 027075076617
View all Pentax 39554 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 146 highlights
144 TROUBLESHOOTING What appears troublesome may be easily remedied. Here are some problems that may occur and their remedies. Before contacting a Pentax service center, check the following items. Symptoms Causes Remedies Reference The shutter does not release. Nothing is displayed on the LCD panel. The lens aperture ring is set to other than the position. The main switch is OFF. Set the lens aperture ring to the position. Turn the main switch ON. p. 15 p. 27 The low battery warning is blinking. Replace the battery. p. 23 The batteries are installed upside-down. Install the batteries properly. p. 23 and film speed are Set the Exposure mode displayed on the LCD panel. other than ISO. p. 52 The built-in flash is being charged. Wait until the flash is fully charged. p. 102 Nothing is displayed on the LCD panel. The main switch is OFF. No battery has been installed. Turn the main switch ON. Install the batteries. p. 27 p. 23 The batteries are installed backwards. Install the batteries properly. p. 23 The battery is dead. Replace the batteries. p. 23 The Autofocus does not work. The focus points are not placed over the subject. The subject is too close. The focus mode is set to or . The subject is difficult to autofocus. Move the camera until the focus points cover the subject. p. 48 Increase the camera-tosubject distance. p. 48 Set the focus mode switch to . p. 43 Focus manually by using the p. 94 matte field.