Pentax IQZoom 145M Super IQZoom 145M Super Manual - Page 37
minute. When
View all Pentax IQZoom 145M Super manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Correcting the date Switch the power on. 1. Pressing the DATE button for 3 seconds: the "Year" digits and ( ",.Pr.4) will blink. 2. Each time the DATE button is depressed, the blinking digits changes in the following manner: Year - Month - Day - Hours - Minutes Release the button when the desired digits appear. 3. Move the zoom lever on the right or left side when you wish to change the blinking digits. The digits increase by one each time the zoom lever moves to the right and the digits decreases by one each time the left zoom lever moves to the left. Holding the zoom lever for about one second will change the data continuously. 4. After the data has been adjusted, depress the DATE button repeatedly until blinking stops. • The blinking "minutes" allows precise fine-tuning of the internal clock to the beginning of a specified minute. When "minutes digits" are blinking, depress the DATE button in sync with a time signal. • If you release the shutter while the blinking data is being corrected, the data will not be imprinted. • If there is a white or yellow object in the corner of the picture where the data is imprinted, the data may be difficult to read. When composing your photographs, try to avoid brightly-colored subjects in that corner. 35