Pentax IQZoom 80S IQZoom 80S Manual - Page 31
Model
View all Pentax IQZoom 80S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
DATE MODEL O ma, Year Month Day Hour Minute - -- (blank) Month Day Year Day Month Year If you purchased the DATE model, read this section. The DATE model records dates up to the year 2049 on pictures. Switching the Mode Press the DATE button 0 with your finger, the mode on the LCD panel switches as shown in the chart. Notes indicates no data will be imprinted. • "M" on the LCD panel indicates "Month". • Use the strap clamp's protrusion to depress the SELECT and ADJUST buttons. Correcting the date 1. Depress the SELECT button 0 to make a dif- ferent category of digits on the LCD panel that you want to change blink. 2. Depress the ADJUST button 0 to change digits of the specified category you chose with the SELECT button. Digits increase by one each time you depress the ADJUST button 0. Holding down the button will advance digits continuously. 3. After the data has been adjusted, depress the SELECT button 0 each time until blinking stops. • Depress the SELECT button 0 each time. The bar mark (-) appears on the LCD panel, indicating that data imprinting choices are possible. • The blinking " : " allows precise fine-tuning of the internal clock to the beginning of a specified minute. To do so, depress the DATE button 0 until "Day-Hour-Minute" digits appear and then depress the SELECT button 0 to make the " : " blink. Then depress the ADJUST button 0 in sync with a time signal. • If you release the shutter while the blinking data is being corrected, the data cannot be imprinted. 29