Pentax K-x 18-55mm White Kit Operation Manual - Page 132
Use the four-way controller, or the e-dial to set the, focal length.
UPC - 027075159617
View all Pentax K-x 18-55mm White Kit manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 132 highlights
130 • You can also change the setting from the [A Rec. Mode 4] menu (p.80). • The Shake Reduction function will not fully work (for about 2 seconds) right after turning on the camera or restoring from Auto Power Off. Wait for the Shake Reduction function to become stable before gently pressing the shutter release button to take a picture. Press the shutter release button halfway. The camera is ready to take a picture when k appears in the viewfinder. • The Shake Reduction function is available with any a compatible PENTAX lens. However, when the aperture ring is set to other than the s (Auto) position or a lens without an s position is used, the camera will not operate unless [22. Using Aperture Ring] is set to [Permitted] in the [A Custom Setting 4] menu. Set this beforehand. However, in such cases some functions will be restricted. Refer to "Notes on [22. Using Aperture Ring]" (p.284) for details. Shooting Functions When the Focal Length Cannot Be Automatically Detected 4 The Shake Reduction function operates by obtaining the lens information such as focal length. If the camera uses a DA, DA L, D FA, FA J, FA or F lens, the lens information is automatically obtained when the Shake Reduction function is activated. The [Input Focal Length] setting screen appears when the camera is turned on with the Shake Reduction function set to k and a type of lens that does not support automatic obtaining the lens information such as focal length (p.282) is mounted. Set the focal length manually in the [Input Focal Length] setting screen. • The [Input Focal Length] setting screen does not appear when using a lens that supports automatic obtaining the lens information such as focal length. • When using a lens without the s position on the aperture or with the aperture set to a position other than the s position, set [22. Using Aperture Ring] in the [A Custom Setting 4] menu to [Permitted]. (p.284) 1 Use the four-way controller (45) or the e-dial to set the focal length. Select from the following 34 focal length values. (The default setting is 35 mm.) Input Focal Length 100 120 135 8 10 12 15 18 20 24 28 30 35 40 45 50 55 65 70 75 85 100 120 135 150 180 200 250 300 350 400 450 500 550 600 700 800 MENU Cancel OK OK