Pentax PC35AF PC35AF Manual - Page 1
Pentax PC35AF Manual
View all Pentax PC35AF manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
PENTAX ImC,35•IF PENTA% LENS PEN -TAX II Insertion of Batteries The electronic system of your Pentax PC35AF operates on two 1.5V mini batteries, (Alkaline battery AAA) (Caution: NiCd batteries can not be used.) 1. Open the battery chamber cover located at the base of the camera by sliding it in the direction of the arrow; use fingernail in the groove to push the cover. 2. Fit two batteries into the chamber as indicated-they should be fitted as shown. Note the + and - markings provided. 3. Close the cover by pushing it back. cD, The new Pentax PC35AF is a compactly designed 35mm Auto Exposure camera with programmed shutter, incorporating completely focus-free operation; the outstanding .....; . feature of the built-in auto focus system. In addition, it features a built-inelectronic flash unit for use where there is insufficient light-or to fill in dark areas and other similar situations. With the inclusion of the optional automatic film winding unit, you can capture a change of mood or expression in a moment; truly, a camera worthy of ,the serious and amateur photographer. This manual has been provided in order that you will be able to enjoy the new Pentax PC35AF to gain maximum advantage from its advanced design. It is recommended that the contents be read over very carefully in order that with the camera you may produce the best pictures possible. 1 Insertion of Batteries • Opening/Closing Lens Protector • Battery Status Check 4), Film Speed Setting 5 Film Loading r, Unloading Film 7 Shooting X Exposure compensation X Flash photography X Self-timer X Focus locking technique X Difficult auto focusing subjects/situations X Attaching the neck strap X Tips in taking good photographs X PC35 Winder ■ Preventive camera maintenance • Specifications • Warranty policy 2 Opening/Closing Lens Protector F. AUTO PENTAX PE.TNt LOINS f-35••022 The lens protector may be opened by pushing protector release in the direction of the arrow. To close, push protector back, locking same in its original position. • With the protector closed, a safety device prevents accidental firing of the shutter; similarly, the flash pop-up release is also m•• 11 locked at the same time. • While holding the camera, even a slight pushing-back of the lens protector would activate the built-in safety device, locking the shutter button. This is to avoid possible vignetting.