Pentax ZX-50 ZX-50 Manual - Page 81
simultaneously
View all Pentax ZX-50 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 81 highlights
(11) USING A PENTAX DEDICATED EXTERNAL FLASH If the built-in flash is not powerful enough, a Pentax dedicated external flash should be used. Using the TTL Auto Flash Mode 1. Remove the hot shoe cover Fc and attach a Pentax dedicated flash unit. 2. Turn ON the flash. 3. Set the flash unit to the TTL Auto Mode. 4. Ensure that the flash is fully charged. 5. Proceed as if the built-in flash were being used. • When the flash is fully charged, the ready lamp on the flash unit lights up. When the shutter release button is depressed halfway down, [ 1 ] appears in the viewfinder indicating the flash is ready. Using the built-in flash and the external flash simultaneously An external flash cannot be used when the built-in flash is in its popped up position. When the built-in flash and the external flash are used simultaneously, use the following optional accessories. • Hot Shoe Adapter FG • Off-Camera Shoe Adapter F • Extension Cord F5P HOTSHOE ADAPTER FG OFF-CAMERA SHOE ADAPTER F 5P SYNC CORD F (EXTENSION CORD F5P)