Pentax ZX-50 ZX-50 Manual - Page 83
Snoi1v1:13d0, Cronvaciv
View all Pentax ZX-50 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 83 highlights
• When using the Three-Level Auto (red, green, and yellow settings) Mode, the aperture value is fixed as shown in the table. When the flash is fully charged, the shutter speed varies within the shutter speed range of 1/100 of second to a slower speed which does not cause camera shake. The slowest shutter speed varies according to the lens focal length. When a non-autofocus (A-lens) lens or the Action Program Mode is in use, the shutter speed will be set to 1/100 of second. AF200T AF280T AF400T Red f/2.8 f/4 f/4 Green f/5.6 f/8 f/8 Yellow f/1 1 with ISO 100 Notes on Pentax dedicated flash units When the built-in flash is used in combination with a Pentax dedicated flash unit, if the trailing-shuttercurtain-sync flash mode is set for the dedicated flash unit, the built- in flash also operates in the trailingshutter-curtain-sync flash mode. Ensure that both flash units are fully charged before releasing the shutter. Contrast-Control-Sync Flash Photography Using the AF330FTZ or AF500FTZ in combination with the built-in flash allows twin flash photography (contrast-control-synch flash photography). This is based on the difference between the amount of light discharged from two units. 1. Put the AF500FTZ or AF330FTZ in the Contrast-Control-Sync Flash Mode. See the flash connection on page 77. 2. Ensure that both flash units are fully charged and then shoot. • The ratio of the amount of flash light is 1 (built-in flash) : 2 (dedicated flash unit). • Do not combine an accessory with a different number of contacts such as a "Hot Shoe Grip" as a malfunction may occur. • In the Contrast-Control-Sync Flash Mode, the top flash sync speed is 1/60 of second. Multi-burst flash with the Pentax dedicated flash When discharging more than 2 Pentax dedicated flashes, make sure that they are of the same type, combine the Type B with Type C or Type D with Type E. (refer to the overview of Flash Function on page 80. The Built-in flash can be operated with any type of Pentax TTL dedicated flash unit. SNOI1V1:13d0 CRONVACIV