Pfaff 1530 Owner's Manual - Page 25

Changing the needle, To remove, To insert, Setting the needle thread tension, Dropping the feed dog

Get Pfaff 1530 PDF manuals and user guides View all Pfaff 1530 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 25 highlights

Operate your Pfaff select Changing the needle Switch off the main switch To remove: Lower the presser foot and move the needle to its highest point. Now loosen the fixing screw A (18) and pull the needle downwards. To insert: The flat side A of the needle must face to the rear. Lower the presser foot and insert the needle, pushing it up as far as it goes. Hold the needle and tighten the fixing screw (18) firmly. Setting the needle thread tension Set the required needle thread tension (10) with the help of the mark A. The normal setting for sewing is 4 to 5. For embroidering, darning and buttonhole set A the tension between 2 and 3. Dropping the feed dog For certain sewing work, e.g. darning the feed dog has to be dropped. To do this, open the bobbin case/hook cover and move slide A fully to the right. Now the feed dog is dropped. A 15

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
15
A
A
A
Operate your Pfaff select
Changing the needle
Switch off the main switch
To remove:
Lower the presser foot
and move the needle to its highest
point.
Now loosen the fixing screw
(18) and pull the needle downwards.
To insert:
The flat side A of the needle
must face to the rear.
Lower the
presser foot and insert the needle,
pushing it up as far as it goes.
Hold
the needle and tighten the fixing screw
(18) firmly.
Setting the needle thread tension
Set the required needle thread tension (10)
with the help of the mark A.
The normal setting for sewing is 4 to 5.
For embroidering, darning and buttonhole set
the tension between 2 and 3.
Dropping the feed dog
For certain sewing work, e.g. darning the feed
dog has to be dropped. To
do this, open the
bobbin case/hook cover and
move slide A fully
to the right. Now
the feed dog is dropped.