Pfaff 212 Owner's Manual - Page 16

- .. -.. Blindstitching hems Attach the blindstitch toot, Turn the utility stitch selector to 11 and turn the colour range selector so that its mark is at the top Turn the fabric wrong side up and told Turn screw 5 (Fig. 29) to adjust the posi its edge back by 1 cm (abt '/2). as shown at 1 in Fig 28. Then told the material hon of edge guide 6 so that the needle at the left of its throw just catches fabric 7 to the desired hero width, as shown in edge 7 (see Figs 28-3 and 29). drawing 2, and baste Fold the hem down so that its folded edge protrudes by The hem is sewn correctly if no stitches about 3 mm (abl '/8°), as shown in draw show on the right side of the fabiic (Fig 28 ing 3. 28 -4) Fig. 29 Place the fabric with its folded edge under the sewing foot and lower the presser bar lifter On heavy woolen fabrics the hero is fold ed once only and its raw edge is finished with zigzag stitches before it is hemmed 29