Pfaff 92 Owner's Manual - Page 29
Needle, Breaks, Faulty, Stitch, Formation, Machine, Feeds, Improperly
View all Pfaff 92 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
3. Needle Breaks Cause: Bent needle strikes point of sewing hook. Needle too thin or thread too heovy. Fabric pulls needle so it bends and strikes needle plate. Bobbin case inserted incorrectly. Remedy: Replace needle at once to prevent further damage. Use correct needle and thread sizes. Don't force the feeding motion. Guide the material lightly. Push bobbin case until you hear it snap into place. 4. Faulty Stitch Formation Cause: Improper tension. Thread too heavy, knotty or hard. Bobbin unevenly wound. Pieces of thread between tension discs. Remedy: Adjust tensions as instructed. Use only first-rate thread - the correct size for the needle and fabric. Don't run thread over finger when winding the bobbin, but lead it around needle thread tension. Raise presser bar lifter and remove thread. 5. Machine Feeds Improperly Cause: Machine does not feed because stitch lenqth control set on "0". Accumulations of lint packed between feed teeth. Remedy: Regulate stitch length, as desired. Take off needle plate and remove lint with a stiff brush. 28