Pfaff Creative Performance Owner's Manual - Page 111
rst sequence, using the arrows
View all Pfaff Creative Performance manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 111 highlights
4. Deselect the sequence by touching outside the design on the screen, or step by using the arrows. 5. Open sequencing once again. Select stitch number 4.1.7. 6. Long touch the duplicate icon. In the pop-up that appears, enter 7 and touch OK for a total of eight copies. 7. Close sequencing to load the second sequence to Embroidery edit. 8. Touch the wheel center icon when move is A selected, to move the new sequence to the center of the hoop. Move 9 mm to the right. 9. Open Embroidery stitch editor (24). 10. Decrease the width of the second sequence to 8 mm. 11. Toggle to the Àrst sequence, using the arrows (A). Increase the length of the sequence to Àt the second sequence, 160.4 mm. Increase the density to 0.6. 12. Close Embroidery stitch editor. Select the second sequence and duplicate. Mirror side to side. Center the copy and move 9 mm to the left of the Àrst sequence. Embroidery mode - edit 8:13