Pfaff Creative Performance Owner's Manual - Page 128
Change thread color, Cut thread end, Embroidery is, nished - clear screen, Change to Cutwork Needle
View all Pfaff Creative Performance manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 128 highlights
Change thread color When it is time to change the needle thread, the machine stops and the upper thread is cut. Change the spool and re-thread the machine. The next recommended color is shown in the pop-up. Cut thread end If Cut jump stitches is not activated in Machine settings in the Settings menu, the machine will stop after stitching a few stitches. Cut the thread and press start/ stop to continue embroidering. Embroidery is Ànished - clear screen When the embroidery is Ànished, the machine will ask you if you want to clear the screen. If you touch OK, the designs will be deleted. Touch cancel to get back to your design. Change to Cutwork Needle (optional accessory) Some cutwork designs can be stitched out using the optional accessory PFAFF® Embroidery Cutwork Needle Kit, (P/N 820 945-096). These designs are marked with a cutwork needle symbol in the DSFBUJWF QFSGPSNBODF Embroidery Collection. When the machine stops and this pop-up message is shown, insert the corresponding cutwork needle. Touch OK and press the Start/Stop button to resume. Note: These cutwork designs can also be stitched out without the cutwork needles, but will then have to be cut manually. Main motor overloaded If the machine is blocked when embroidering, the main motor can get overloaded. When the main motor and power supply are no longer overloaded, the OK button will be enabled. Touch OK to resume embroidering. 9:12 Embroidery mode - stitch-out