Pfaff Freestyle 1527 Owner's Manual - Page 55
individual
View all Pfaff Freestyle 1527 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
Decorative sewini and enibroijert t 'nq'ec flora embroidery rot this flower arrangement, only a dense 'igzag stitch was used in combination with the variable stitch width and the various needle positions. Place stabilizer under the fabric. • Draw the contures of a flower motif with a self-erasing textile pen. • Set needle thread tension to buttonhole", select zigzag stitch E, set stitch length to "buttonhole". Flowers: Select center needle position and embroider individual petals. Adjust the stitch width with the width dial (24) during sewing according to the :ontures of the flower. Embroiderhig corners By changing the stitch width during sewing of dense zigzag stitches you can embroider corners with 45 degree angles. • Set needle thread tension to "buttonhole', zigzag stitch E, set stitch length to "buttonhole" and stitch width 5 mm. 0 Select right needle position and embroider a straight line. Embroider corner: After the needle has penetrated the material to the right, reduce the stitch width using the width dial (24) by 0.5 mm to 4.5 mm. Sew a stitch. Reduce the width once again by 0.5 mm and sew a stitch. Continue in this manner until the stitch width is 0.5 mm. Loaves: Select right needle position and embroider half of the leaf. Vary the '>titch width using the width dial (24). Fern the handwheel towards you after hnishinq the first half of the leaf until the needle is positioned in the material. • loin the material 180 degrees and robroider the other half of the leaf. Turn the handwheel towards you until the needle penetrates the material. Turn the material 90 degrees and sew a stitch. Increase the width by 0.5 mm to 1.0 mm. Sew one stitch. Increase the width by 0.5 mm again and sew one stitch. Continue in this manner until the initial width is achieved. Now embroider a straight line. If the corner is to continue in the opposite direction, use the outermost left needle position j43