Pfaff Freestyle 1527 Owner's Manual - Page 57

owing, stitch

Page 57 highlights

Decorative sewing and embividen' lechniques Richelleu this especially artistic form of eyelet and nsert embroidery is easy to sew with your owing machine. Using a magic marker, draw your motif onto the right side of the fabric. Then place two layers of water-soluble Iabilizer underneath the fabric to be ombroidered and hoop both the fabric ond the stabilizer into an embroidery Eyelet embroidery Traditional eyelet embroidery which previously had to be made laboriously by hand can now be made quite easily with the help of an eyelet plate (special accessory). This is very effective on blouses, bed or table linen. Use utility stitches such as the zigzag stitch, blind stitch, or elastic stitch. For classic eyelet embroidery, use stitch E, with a stitch width 3-5 mm. hoop. Insert decorative embroidery foot number 1. Remove the presser foot. Set the presser bar lifter at the darning position (see page 31). k lend more durability to the embroidery, sew all of the contours twice using the straight stitch (stitch length approx. 1 mm). • Place the eyelet plate on the needle plate, making sure pin A fits in the middle cutout of the needle plate. Then push the plate down at the front. 4 hen carefully cut out the fabric 2 mm next to the contour from the areas which are to be hollow. The stabilizer must not move. • Place the marked fabric taut in an embroidery hoop. Cut one or two of the fabric threads and push the fabric over the pin in the eyelet plate. The fabric must fit snugly around the pin. Embroider the contours with a dense • Draw up the bobbin thread and hold it zigzag stitch. for the first few stitches. Finally, simply dissolve the stabilizer Iluece in cold water and your one-of-a kind design is finished. • Stitch around the cut with the selected stitch. It is important to turn the fabric slowly and evenly. The stitches should be very close to each other. • Afterwards secure with straight stitch. 45

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78

Decorative
sewing
and
embividen’
lechniques
nsert
embroidery
is
easy
to
sew
with
your
owing
machine.
Using
a
magic
marker,
draw
your
motif
onto
the
right
side
of
the
fabric.
Then
place
two
layers
of
water-soluble
Iabilizer
underneath
the
fabric
to
be
ombroidered
and
hoop
both
the
fabric
ond
the
stabilizer
into
an
embroidery
hoop.
Insert
decorative
embroidery
foot
number
1.
k
lend
more
durability
to
the
embroidery,
sew
all
of
the
contours
twice
using
the
straight
stitch
(stitch
length
approx.
1
mm).
hen
carefully
cut
out
the
fabric
2
mm
next
to
the
contour
from
the
areas
4
which
are
to
be
hollow.
The
stabilizer
must
not
move.
Embroider
the
contours
with
a
dense
zigzag
stitch.
Finally,
simply
dissolve
the
stabilizer
Iluece
in
cold
water
and
your
one-of-a
kind
design
is
finished.
Eyelet
embroidery
Traditional
eyelet
embroidery
which
previously
had
to
be
made
laboriously
by
hand
can
now
be
made
quite
easily
with
the
help
of
an
eyelet
plate
(special
accessory).
This
is
very
effective
on
blouses,
bed
or
table
linen.
Use
utility
stitches
such
as
the
zigzag
stitch,
blind
stitch,
or
elastic
stitch.
For
classic
eyelet
embroidery,
use
stitch
E,
with
a
stitch
width
3-5
mm.
Remove
the
presser
foot.
Set
the
presser
bar
lifter
at
the
darning
position
(see
page
31).
Place
the
eyelet
plate
on
the
needle
plate,
making
sure
pin
A
fits
in
the
middle
cutout
of
the
needle
plate.
Then
push
the
plate
down
at
the
front.
Place
the
marked
fabric
taut
in
an
embroidery
hoop.
Cut
one
or
two
of
the
fabric
threads
and
push
the
fabric
over
the
pin
in
the
eyelet
plate.
The
fabric
must
fit
snugly
around
the
pin.
Draw
up
the
bobbin
thread
and
hold
it
for
the
first
few
stitches.
Stitch
around
the
cut
with
the
selected
stitch.
It
is
important
to
turn
the
fabric
slowly
and
evenly.
The
stitches
should
be
very
close
to
each
other.
Afterwards
secure
with
straight
stitch.
45
Richelleu
this
especially
artistic
form
of
eyelet
and