Pfaff SMARTER BY 130s User Guide - Page 8
Presser Feet
View all Pfaff SMARTER BY 130s manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Presser Feet Standard Presser Foot 0 This foot is used mainly for straight stitching and zigzag stitching with a stitch length longer than 1.0 mm. Clearview Foot 1 When sewing decorative stitches or short zigzag stitches and other utility stitches with less than 1.0mm stitch length, use this IRRW 7KH JURRYH RQ WKH XQGHUVLGH RI WKH IRRW LV GHVLJQHG WR ÁRZ smoothly over the stitches. Blindhem Foot 3 This foot is used for blindhem stitches. The toe on the foot guides the fabric. The red guide on the foot is designed to ride along the fold of the hem edge. Note: Always use at least 5mm stitch width when using Blind Hem Foot 3. If using a stitch width other than the recommended, swing the needle by turning the hand wheel to make sure the needle doesn't hit the metal pin in the foot. Zipper Foot 4 This foot can be snapped on either the right or the left of the needle, making it easy to sew close to both sides of the zipper teeth. Move the needle position to the right or left to sew closer to zipper teeth. Four-Step Buttonhole Foot 5A (for 130s/140s) 6OLGLQJSODWHXQGHUIRRWKDVFRQYHQLHQWO\VSDFHGPDUNLQJVWRVWDUW and stop your buttonhole at precisely the correct point. One-Step Buttonhole Foot 5B (for 150s/160s) This foot has a space in the back for a button used to set the size of WKHEXWWRQKROH7KHPDFKLQHZLOOVHZDEXWWRQKROHWRÀWWKDWEXWton size. 8