Pfaff expression 2038 Owner's Manual - Page 29

Changing the needle, Threading the twin needle

Get Pfaff expression 2038 PDF manuals and user guides View all Pfaff expression 2038 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 29 highlights

Preparations Changing the needle Switch off the main switch To remove: Lower the presser foot and set the needle to its highest position. Loosen the needle screw (52) and pull the needle out downwards. To insert: The flat side A of the needle must face to the rear. Lower the presser foot and insert A the needle, pushing it up as far as it will go. Hold the needle and tighten the needle screw (52) firmly. Threading the twin needle: Replace the sewing needle with a twin needle. Insert the second spool pin and place one spool of thread on each of the spool pins. During threading in the left threading slot (34), make sure that you pass one thread each to the left and right sides of tension disk B. Continue threading in the usual manner, making sure the threads do not become twisted together. Pull the threads right and left into the thread guide and thread the needles. Note: It is not possible to use the integrated needle threader with a twin needle. B 2:13

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
2:13
A
B
Preparations
Changing the needle
Switch off the main switch
To remove: Lower the presser foot and set the needle to its
highest position. Loosen the needle screw (52) and pull the
needle out downwards.
To insert: The
fl
at side A of the
needle must face to the rear.
Lower the presser foot and insert
the needle, pushing it up as far
as it will go. Hold the needle and
tighten the needle screw (52)
fi
rmly.
Threading the twin needle:
Replace the sewing needle with a twin needle. Insert the second
spool pin and place one spool of thread on each of the spool
pins. During threading in the left threading slot (34), make
sure that you pass one thread each to the left and right sides
of tension disk B. Continue threading in the usual manner,
making sure the threads do not become twisted together. Pull
the threads right and left into the thread guide and thread the
needles.
Note: It is not possible to use the integrated needle threader with a
twin needle.