Pfaff hobby 1022 Owner's Manual - Page 60
Bias tape binder - instructions
View all Pfaff hobby 1022 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
Accessories and needles Bias tape binder Binding with bias tape is a very easy method of giving fabric edges a smooth and neat appearance. For this you need unfolded bias tape about 1ß (24 mm) wide. • Remove the presser foot and holder. Attach the bias binder. • Cut the beginning of the bias tape at a diagonal. • Feed the tape into the scroll of the binder and pull out to the back. • Adjust the binder and/or the needle position so that the needle pierces the fabric approximately 1/16ß (1-1.5 mm) from the folded edge of the bias tape. • Stitch about 1ß (2.5 cm) along the bias tape. • Insert the edge of the fabric to be bound between the bias tape edges into the slot of the binder. The bias tape will enclose the raw edge automatically during sewing. RufÁer With the rufÁer you can make closely or widely spaced pleats automatically while sewing. This is very useful for rufÁes, frills, home textiles, etc. The rufÁer can be used in three different ways: 1. Folding and securing pleats in fabric. 2. Folding pleats in fabric and securing to a second fabric in one operation. 3. Folding pleats in fabric, attaching lace and securing to another fabric in one operation. When you buy the rufÁer from your PFAFF dealer, full operating instructions are included. Tip: You can obtain an additional decorative effect by using a zigzag or fancy stitch. 56