Pfaff hobbylock 4870 Owner's Manual - Page 81
the needles
View all Pfaff hobbylock 4870 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 81 highlights
- Changing the lower knife Switch main switch off To remove: Set the seam width adjust ing knob (17) to 3. Remove the sewing foot as well as the needle plate (see page 30, 31). Raise the needles to their high est position and disengage the upper knife (see page 32). Undo the lower knife retaining screw (47) with the large screwdriver from the accessories (see page 66) and remove the screw, pressure plate and lower knife. To insert: Slide the new lower knife (48) between the lower knife holder and the upper knife. Place the pressure plate on the hole in the lower knife so that the longer part with the slanted corner is pointing backwards to the machine. Secure the lower knife and the pressure plate with the retaining screw. Insert the needle plate. Bring the cutting edge of the lower knife to the same level as the needle plate. Now tighten up the retain ing screw. 79