Pfaff quilt ambition 2.0 Manual - Page 22
Buttons
View all Pfaff quilt ambition 2.0 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
9 10 11 12 13 1 2 3 4 Preparations 5 14 15 6 7 8 Buttons Needle up/down with indicator (1) Press this button to move the needle up or down. The setting of the needle stop position is changed at the same time. The indicator is lit when needle down is activated. You can also tap the foot control to raise or lower the needle. Stitch restart (2) If you stop sewing in the middle of the stitch, press stitch restart to start sewing at the beginning of the stitch again without having to reset any special settings you have made. If you press the stitch restart button while you are DFWLYHO\VHZLQJWKHVWLWFKZLOOEHÀQLVKHGDQGWKH machine will then stop. Immediate tie-off (3) Press the tie-off button while sewing and your machine sews a few tie-off stitches and stops automatically. Speed control lever (4) The speed control lever sets the maximum sewing speed. To increase sewing speed, slide the lever to the right, to decrease sewing speed, slide the lever to the left. Start/stop (5) Press this button to start or stop the machine without using the foot control. Press the button once to start and press it again to stop. Reverse (6) with indicator (7) For permanent reverse, press the button before starting to sew. The reverse indicator (7) will be lit and the machine sews in reverse until you press the button again to cancel. If you press the reverse button while sewing, the machine sews in reverse for as long as you keep the button pressed. The reverse indicator is lit when the reverse button is pressed. Reverse is also used when sewing programmed tieoff end and darning stitches. Programmed tie-off (6) with indicator (8) The programmed tie-off indicator is lit to indicate that one or several tie-off options are activated. The indicator stays lit until the tie-off options are no longer in use. Stitch width or stitch positioning (10) Increase or decrease the stitch width using the "-" and "+" buttons. For straight stitches, use the "-" and "+" buttons to change the stitch position. Mirror side to side (11) For mirroring stitches and sequences side to side. Mirror end to end (12) For mirroring stitches and sequences end to end. 22